Votos - 5, Puntuación media: 4
(
)
)
|
Resumen del manual
This guide briefly describes the steps to start using your QL-500/550. Refer to the User's Guide for more detailed information. The User's Guide can be found in the Manuals folder of the CD-ROM included with the QL-500/550. Press the ON/OFF button to turn the QL-500/550 off. Hold the DK Roll compartment cover at the sides near the front of the QL-500/550 and firmly lift up to open the cover. Place the spool into the spool guides in the DK Roll compartment. Lift the label lever and then thread the end of the DK Roll into the slot immediately before the cutter. Lower the label lever and then close the DK Roll compartment cover. Connect the AC power cord to the QL-500/550 and then plug the power supply cord into a standard electrical outlet. • Check that the electrical outlet is 220 ~ 240 V before inserting the plug. • Remove the power supply cord from the electrical outlet after you have finished using the QL-500/550. • Do not pull the cord when removing it from the electrical outlet. The wire in the cord may become damaged. Check that the package contains the following before using your QL-500/550. If any item is missing or damaged, please contact your Brother dealer. Unpacking Your QL-500/550 The installation procedure differs depending on the operating system running on your personal computer. Refer to the installation procedure for the appropriate operating system to install the software. Installing the Software Connecting to the Power Supply Your QL-500/550 comes with a paper guide that collects strips of printed labels that have not been cut off from the machine. Attach the paper guide to the front of the QL-500/550 as shown in the figure. Remove the paper guide when printing more than 10 labels continuously and cutting each label automatically (QL-550 only). Installing the Paper Guide Installing the DK Roll When using Microsoft® Windows® 2000 Professional/XP (Home/Professional) 1 2 Start up the PC and put the CD-ROM into the CD-ROM drive. The QL-series Installer starts up and the P-touch Setup screen is displayed. • It may take a short time to display the screen. • If it does not start up automatically, double click the “Setup.exe” icon on the CD-ROM. If you are happy with you settings, click [Next]. • It may take some time to display this screen. • If it is not set correctly, click [Back] and set it again. The Add-In settings screen is displayed. 8 Click [Next]. The installation of the driver is completed, the User Registration screen is displayed. 10 Read the license agreement carefully. If you agree with the terms and conditions of the license agreement, click [Yes] to continue the installation. The Customer Information screen is displayed. Click [Next]. The Add shortcut screen is displayed. To instaIl to a different folder click [Browse] and select another folder. 3 5 4 6 USB cable AC Power cord Starter roll CD-ROM Front Back FEED button CUT button (QL-550 only) LED lamp ON/OFF button CUT lever (QL-500 only) DK Roll compartment cover AC Power cord USB port · Make sure that the spool arms are inserted firmly in the spool guides on the left and right. · Insert the spool with the DK Roll located on the right hand side of the QL- 500/550. When unable to thread the end of the DK Roll into the slot, thread it as far as possible, then lower the label lever and close the cover. Press the ON/OFF button to turn the QL-500/550 on, and then press the FEED button to set the roll. 7 See the reverse side for an example of creating a label. Paper guide Cleaning Sheet QL-500 QL-550 The QL-500/550 includes one starter roll of DK Die-cut Standard Address Labels (100 labels), and one starter roll of DK Continuous Durable Paper Tape 2-3/7" (25 feet). Do not connect the QL-500/550 to your personal computer until directed to do so when installing the printer driver. • Quick Start Guide • DK Label & Tape Guide • Warranty Card Safety Precautions • Do not expose the QL-500/550 to direct sunlight. • Do not place or store the QL-500/550 near heaters or other hot appliances, in any location exposed to extremely high or low temperatures, high humidity or dusty locations. Doing so could cause the machine to malfunction. • Do not place any heavy objects containing water on top of the QL-500/550. If water or any foreign object enters the QL-500/550, immediately disconnect the machine from the power and contact your Brother dealer. • Do not insert any objects into or block the label output slot, or USB port. • Use only the authorized power source for the QL-500/550. • Do not disassemble the QL-500/550 or let it come into contact with water to avoid possible fire or electric shock. Do not remove the power cord from nor insert it into the electrical outlet with wet hands. Doing so could cause an electrical shock. • If the QL-500/550 will not be used for an extended period, remove the power cord from the electrical outlet. • Always hold the plug when removing the power cord from or inserting it into the outlet. Do not pull on the cord...