Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
No Cassette! You tried to print a label when there is no cassette installed. Cutter Error! Tape cutter lever is used in the middle of printing process. Full! The maximum number of characters (80 characters) have already been entered. Text Too Long! The text length exceeds the selected label length or the selected Auto Format setting length. No Frame OK? Printing on 0.13" (3.5 mm) tape with invalid Frame setting ON. (Select to print with no Frame, to cancel.) Problem Solution The display stays blank after you have turned on the machine. • Check that the batteries are correctly inserted. • If the batteries are weak, replace them. • Check that the AD-30/AD-24 adapter is correctly connected. The machine does not print, or the printed characters are blurred. • Check that the tape cassette has been inserted correctly. • If the tape cassette is empty, replace it. The printed characters are not formed properly. • The batteries may be weak. Replace them. The memory has cleared on its own. • The batteries may be weak. Replace them. A blank horizontal line appears through the printed label. • There may be some dust on the print head. Remove the tape cassette and use a dry cotton swab to gently wipe the print head with an up-and-down motion. • The print head can be cleaned more easily if the optional print head cleaning cassette (TZ-CL3) is used. The machine has "locked up" (i.e., nothing happens when a key is pressed, even though the machine is on). • Turn off the machine, and then while holding down and , press to turn the machine back on. Finally, release and . • Note: The text and formats in the display and all text files stored in the memory are erased. Also, the language and unit settings will be cleared. Item Specification Dimensions 6.4" (W) . 6.0" (D) . 2.4" (H) (160 mm (W) . 151 mm (D) . 60 mm (H)) Weight 1.03 lbs. (470 g) (without batteries and tape cassette) Power supply Six AAA-size alkaline batteries (LR03) or optional AC adapter (model AD-30/AD-24) Tape cassette Brother TZ tape (width) : 0.13" (3.5 mm), 0.23" (6 mm), 0.35" (9 mm), 0.47" (12 mm) Accessories Stock No. Tape Cassettes See the attached "Supplies and Accessories Guide". AC Adapter model AD-30/AD-24 Cutter Unit TC-5 (replacement) Carrying Case CC1000 Switching Upper Case/Lower Case Making Two Line Text Move the cursor to where the second line starts and press . Use either 3/8" (9 mm) or 1/2" (12 mm) wide tape for two line text. Entering Symbols > • To go to the next group, press . • To cancel operations, press . Entering Accented Characters > > / > / • To cancel operations, press . • The order of accented characters differ by the selected LCD language. To Clear By pressing the Backspace Key, the letters will be deleted one by one. All text and settings will be cleared. + Group Symbols Group Symbols 1 7 2 8 3 9 4 10 5 11 6 Accented Characters Accented Characters A a C c D d E e G g I i K k L l N n O o R r S s T t U u Y y Z z Upper case ( ON) Lower case ( OFF) Display Label image Setting [Size] > [Size] > [Large] Automatically adjusts the text size according to the tape width. Setting [Width] > [Width] > [.2] Setting [Style] (Vertical) > [Style] > [Vertical] Setting [Underline/Frame] > [Underline/Frame] > [Underline] Frames can not be printed on 9/64" (3.5mm) tape. Setting [Tab] You can make aligned texts by setting tabs. Example: To set a tab between "ABC" and "D" The cursor should be positioned where you set a tab. > > [Tab] • You can also set a tab by using the Tab Key on the keyboard. Setting [Tab Length](Auto / 0.0" - 4.0") > [Tab Length] > • You can also select the length by entering the length with Num keys. • To return to [Auto], press . Setting [Label Length](Auto / 1.2" - 12.0") > [Label Length] > • You can also select the length by entering the length with Num keys. • To return to [Auto], press . Setting [Auto Format] You can choose label length from six formats to create labels for various applications. > [Auto Format] > [VHS Spine] Text Preview You can preview the text before printing. • The LCD shows the whole text and the label length (inch/mm), then returns to the original text. • Only the text can be previewed, not the font, style, size, underline/frame or any additional features. Feeding (Tape Feed) + Printing • To cut off the label, push in the tape cutter lever on the upper-right corner of the machine. • To prevent damage to the tape, do not try to cut while the message "Print" or "Feed" is displayed. Setting [Margin] (Tape Margin) > [Margin] > [Full] [Full]/[Half]/[Narrow] is for leaving equal margins on both sides of the text. NOTE: Cut along the printed dots (:) with scissors so the text is centered in the label. [Chain Print] is for printing more than 1 copy of a label with minimum margin