Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
Use only a single-outlet surge suppressor that meets all of the specifications described on page 13. To purchase a surge suppressor, see your local PROFORM dealer or call the telephone number on the front cover of this manual and order part number 146148, or see your local electronics store. 13. Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may slow, accelerate, or stop unexpectedly, which may result in a fall and serious injury. 14. Keep the power cord and the surge suppressor away from heated surfaces. 15. Never move the walking belt while the power is turned off. Do not operate the treadmill if the power cord or plug is damaged, or if the treadmill is not working properly. (See TROUBLESHOOTING on page 21 if the treadmill is not working properly.) 16. Read, understand, and test the emergency stop procedure before using the treadmill (see HOW TO TURN ON THE POWER on page 15). 17. Never start the treadmill while you are standing on the walking belt. Always hold the handrails while using the treadmill. 18. The treadmill is capable of high speeds. Adjust the speed in small increments to avoid sudden jumps in speed. 19. The pulse sensor is not a medical device. Various factors, including the user's movement, may affect the accuracy of heart rate readings. The pulse sensor is intended only as an exercise aid in determining heart rate trends in general. 3 20. Never leave the treadmill unattended while it is running. Always remove the key, unplug the power cord, and switch the reset/off circuit breaker to the off position when the treadmill is not in use. (See the drawing on page 5 for the location of the circuit breaker.) 21. Do not attempt to raise, lower, or move the treadmill until it is properly assembled. (See ASSEMBLY on page 6, and HOW TO FOLD AND MOVE THE TREADMILL on page 19.) You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. 22. When folding or moving the treadmill, make sure that the storage latch is locked in the storage position. 23. Never insert any object into any opening on the treadmill. 24. Inspect and properly tighten all parts of the treadmill regularly. 25. DANGER: Always unplug the power cord immediately after use, before cleaning the treadmill, and before performing the maintenance and adjustment procedures described in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing other than the procedures in this manual should be performed by an authorized service representative only. 26. This treadmill is intended for in-home use only. Do not use this treadmill in a commercial, rental, or institutional setting. SAVE THESE INSTRUCTIONS 4 BEFORE YOU BEGIN Thank you for selecting the revolutionary PROFORM® 665 E. The 665 Eoffers an impressive selection of features designed to make your workouts at home more enjoyable and effective. And when you’re not exercising, the unique 665 E can be folded up, requiring less than half the floor space of other treadmills. For your benefit, read this manual carefully before using the treadmill. If you have questions after reading this manual, please see the front cover of this manual. To help us assist you, note the product model number and serial number before contacting us. The model number and the location of the serial number decal are shown on the front cover of this manual. To avoid a registration fee for any service needed under warranty, you must register the treadmill at Before reading further, please familiarize yourself with the parts that are labeled in the drawing below. Handrail Upright Accessory Tray Key/Clip Reset/Off Circuit Breaker Walking Belt Platform Cushion Foot Rail Power Cord Rear Roller Adjustment Bolts Console Pulse Sensor 5 ASSEMBLY To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner. Assembly requires the included hex keys and your own Phillips screwdriver , adjustable wrench , and needlenose pliers . Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: If a part is no...