Votos - 5, Puntuación media: 3.4
(
)
)
|
Resumen del manual
DESCRIPTION PARTS CHART _ЯП: 301 302 311 312 313 321 322 323 UPRIGHT FRAME WEIGHT SUPPORT 1-1/4" ROUND PLUG 50 SQ. END PLUG HAND GRIP 1/2" X 3n HEX HEAD BOLT V2n NYLON NUT M2" \NASHER I 1 1 2 2 2 3 3 8 ^ — 301 *302 4 a_j 311 312 313 s* 9 *■ 321 322 323 0 1/4 1/2 3/4 V (inch) 1/2 T' 1/2 1/2 1/2 1/2 6" The Dip attachment can attach to either side of the F410 Linear Smith. 1. Removed the two Bolts{20) attaching side Base framed 1 or 2) to the Rear Stabilizer (3) Discard the Connect Plate(14). Attach Upright frame(301) to Base Frame(1) and tighten Bolts(20), V\fesher(27) and Nut(29) again. 2. Attach Wfeight Support(302) onto Upright Frame(301), tighten three Bolts{321). six Washers{322) and three Nute(323>. 3. Wet Hand Grip(313) and slide into the Weight Support(302). 4. Attach Round Plug(311) and End Cap{312) onto Wteight Support302). 3ii Thun к you Гог purchasing the Bodycraft Smith Attachment Strength Training System. If You have any questions« please call your local BodyCraft dealer or call our customer service department at 800-990-5556._...