Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
These precautions are intended for the personal safety of the operator, user, servicer, and those maintaining the machine. Indicates an imminently hazardous situation that, if not avoided, will cause severe personal injury or death. DANGER Indicates a hazardous situation that, if not avoided, could cause severe personal injury or death. WARNING Indicates a hazardous situation that, if not avoided, may cause minor or moderate personal injury or property damage. CAUTION Additional precautionary statements (“IMPORTANT” and “NOTE”) are followed by specific instructions. IMPORTANT: The word “IMPORTANT” is used to inform the reader of specific procedures where minor machine damage will occur if the procedure is not followed. NOTE: The word “NOTE” is used to communicate installation, operation, maintenance or servicing information that is important but not hazard related. Important Safety Instructions Save These Instructions Failure to install, maintain, and/or operate this machine according to manufacturer’s instructions may result in conditions which can produce serious injury, death and/or property damage. WARNING NOTE: The WARNING and IMPORTANT instructions appearing in this manual are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution, and carefulness are factors which CANNOT be built into this press. These factors MUST BE supplied by the person(s) installing, maintaining or operating the ironer. Always contact your dealer, distributor, service agent, or the manufacturer on any problems or conditions you do not understand. Always contact your dealer, distributor, service agent, or the manufacturer on any problems or conditions you do not understand. 1.Read all instructions before using the press. 2.Refer to the GROUNDING INSTRUCTIONS in the INSTALLATION manual for the proper grounding of the press. 3.Do not allow children to play on or in the press. 4.Do not reach into the press while the press is in operation. 5.Do not install or store the press where it will be exposed to water and/or weather. 6.Do not tamper with the controls. 7.Do not repair or replace any part of the press, or attempt any servicing unless specifically recommended in the user-maintenance instructions or in published user-repair instructions that the user understands and has the skills to carry out. 8.To reduce the risk of an electric shock or fire, DO NOT use an extension cord or an adapter to connect the press to the electrical power source. 9.Use press only for its intended purpose, finishing garments. 10.ALWAYS disconnect the press from electrical supply before attempting any service. Disconnect the power cord by grasping the plug, not the cord. 11.Install the press according to the INSTALLATION INSTRUCTIONS. All connections for steam, electrical power and grounding must comply with local codes and be made by licensed personnel when required. 12.Replace worn power cords and/or loose plugs. 13.Never operate the press with any guards and/or panels removed. 14.DO NOT operate the press with missing or broken p...