Votos - 5, Puntuación media: 4
(
)
)
|
Resumen del manual
Write the serial number in the space above for reference. Serial Number Decal (under the seat) • Assembly • Operation • Maintenance • Part List and Drawing Sears, Roebuck and Co. Hoffman Estates, IL 60179 WEIGHT SYSTEM EXERCISER User's Manual TABLE OF CONTENTS WARNING DECAL PLACEMENT .............................................................. 2 IMPORTANT PRECAUTIONS ................................................................ 3 BEFORE YOU BEGIN ...................................................................... 4 PART IDENTIFICATION CHART .............................................................. 5 ASSEMBLY ............................................................................... 6 ADJUSTMENT ........................................................................... 21 WEIGHT RESISTANCE CHART .............................................................. 23 CABLE DIAGRAM ......................................................................... 24 MAINTENANCE .......................................................................... 25 EXERCISE GUIDELINES .................................................................. 26 PART LIST .............................................................................. 29 EXPLODED DRAWING .................................................................... 30 90-DAY FULL WARRANTY .......................................................... Back Cover WARNING DECAL PLACEMENT This drawing shows the location(s) of the warning decal(s). If a decal is missing or illegible, call 1-877-992-5999 and request a free replacement decal. Apply the decal in the location shown. Note: The decal(s) may not be shown at actual size. Misuseof this machine may result in serious injury. Read user's manual prior to use and follow aftwarnings and instructions, Do not allow children on or around machine. User weight must not \ exceed 300 pounds. Replace label if damaged, iflegible,or _ I1 removed. iMPORTANT PRECAUTIONS BEFORE YOU BEGIN Thank you for selecting the versatile WELDER PRO ® reading this manual, please see the front cover of this 6900 weight system. The weight system offers a manual. To help us assist you, note the product model selection of weight stations designed to develop every number and serial number before contacting us. The major muscle group of the body. Whether your goal is model number and the location of the serial number to tone your body, build dramatic muscle size and decal are shown on the front cover of this manual. strength, or improve your cardiovascular system, the weight system will help you to achieve the specific Before reading further, please review the drawing results you want. below and familiarize yourself with the parts that are labeled. For your benefit, read this manual carefully before using the weight system. If you have questions after Assembled Dimensions: Height: 6 ft. 11 in. (211 cm) Width: 3 ft. 7 in. (109 cm) Depth: 6 ft. 5 in. (196 cm) High Pulley Station Arm Pin Shroud Arm Backrest Left Side Curl Pad Weight Right Side Weight Pin Leg Lever Seat Low Pulley Station Foot Plate Note: The terms "right side" and "left side" are used relative to a person sitting on the seat; they do not correspond to right and left on the drawings in this manual. 4 PART iDENTiFiCATiON CHART Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is the key number of the part, from the PART LIST near the end of this manual. IMPORTANT: If you cannot find a part in the hardware kit, check to see if it has been preassembled. If a part is missing, please call 1=877=992=5999. To avoid damaging parts, do not use power tools for assembly. B M4 x 20mm Self M4 Washer M6 x 32mm Screw (64) tapping Screw (69) (33) M10 x 25mm Bolt (74) M10 x 46mm Bolt (81) M6 x 16mm Screw (62) MIO x 25mm M6 Washer (82) Button Screw (77) M10 x 51mm Bolt (66) r r M4.2 x 16mm Self- F_ tapping Screw (49) M8 M8 x 22mm x 63mm Carriage Bolt (87) _ / Shoulder Bolt (65) M8 Washer (59) [ [ M4 x 12mm LJ/ Screw (78) M10 x 63mm Bolt (75) !I M10 x 64mm Bolt Set (76) MIO Washer (57) M8 Locknut (58) l M8 x 65mm Bolt (68) M10 x 67mm Bolt (71) MIO Locknut (56) Large Washer (85) M10 x 77mm Bolt (79) _ 13mm Spacer M12 Nut (84) M10 x 86mm Carriage Bolt (67) (52) M10 x 130mm Bolt (72) 11mm Spacer (86) ASSEMBLY To make assembly easier, carefully read the following information and instructions: o Assembly requires two persons. Because of its weight and size, assemble the weight system in the location where it will be used. Make sure that there is enough clearance to walk around the weight system. o Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. o For help identifying small parts, use the PART IDENTIFICATION CHART on page 5. The Four Stages of the Assembly Process Frame Assembly--You will begin by assembling the base and the uprights that form the skeleton ...