Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
Write the serial number in the space above for future reference, Serial Number Decal (under seat) USER'S MANUAL QUESTIONS? As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or if a part is damaged or missing, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT DIRECTLY. CALLTOLL-FREE: 1-877-992-5999 Mon.-Fri., 6 a.m.-6 p.m. MST ON THE WEB: new products, prizes, fitness tips, and much more! TABLE OF CONTENTS WARNING DECAL PLACEMENT ............................................................. 3 IMPORTANT PRECAUTIONS ................................................................ 4 BEFORE YOU BEGIN ...................................................................... 5 ASSEMBLY ............................................................................... 6 ADJUSTMENTS .......................................................................... 16 CONSOLE OPERATION .................................................................... 20 TROUBLESHOOTING ..................................................................... 22 EXERCISE GUIDELINES .................................................................. 23 ORDERING REPLACEMENT PARTS .................................................. Back Cover LIMITED WARRANTY .............................................................. Back Cover Note: A PART IDENTIFICATION CHART and a PART LIST/EXPLODED DRAWING are attached in the center of this manual. Remove the PART IDENTIFICATION CHART and PART LIST/EXPLODED DRAWING before beginning assembly. WELDER is a registered trademark of ICON IF', Inc. 2 WARNING DECAL PLACEMENT The decals shown here have been placed on the resistance system. If a decal is missing or illegible, call the toll-free telephone number on the front cover of this manual and order a free replacement decal. Apply the decal in the location shown. • Misuse of this machine hands clear area. and of may result in serious injury. • Read user's manual prior to use and follow all warnings and instructions. • Do not allow children on or around machine. • Keep body, clothing, and hair free and clear of all moving parts. • Replace label if damaged, illegible, removed. or 3 IMPORTANT PRECAUTIONS BEFORE YOU BEGIN Thank you for selecting the innovative PLATINUM PLUS BY WELDER ®resistance system. The resistance system offers a selection of stations designed to develop every major muscle group of the body. Whether your goal is to tone your body, build dramatic muscle size and strength, or improve your cardiovascular system, the resistance system will help you to achieve the specific results you want. For your benefit, read this manual carefully before using the resistance system, If you have questions after reading this manual, see the front cover of this Top Frame High Pulley Handle Console Squat Backrest Backrest Curl Pad Curl Leg Lever manual. To help us assist you, please note the product model number and serial number before calling. The model number is WESY7974.0. The serial number can be found on a decal attached to the resistance system (see the front cover of this manual). To avoid a registration fee for any service needed under warranty, you must register the resistance system at Before reading further, please review the drawing below and familiarize yourself with the parts that are labeled. Squat Arm Squat Pin Storage Knob Low Pulley Seat Seat Knob Base Plate ASSEMBLED DIMENSIONS: Height: 85 in. / 216 cm Width: 47 in. / !19 cm Depth: 94 in. / 239 cm 5 ASSEMBLY Before beginning assembly, carefully read the following information and instructions: • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. • For help identifying small parts, use the PART IDENTIFICATION CHART. Note: Some small parts may have been pre-attached for shipping. If a part is not in the parts bag, check to see if it has been pre-attached. 1, Attach four Plastic Base Feet (71) to the Base (1) with four M4 Washers (157) and four M4 x 16mm Self-tapping Screws (104). Attach a Wheel (49) to the Base (1) with an M8 x 90mm Shoulder Bolt (125), two M8 Washers (152), and an M8 Nylon Jamnut (139). Repeat with the other Wheel. • Tighten all parts as you assemble them, unless instructed to do otherwise. • As you assemble the resistance system, make sure all parts are oriented as shown in the drawings. E The included hex keys W and the following tools (not included) are required for assembly: • Two adjustable wrenches • One rubber mallet • One standard screwdriver • One Phillips screwdriver • Lubricant, such as grease or petroleum jelly, tape, and soapy water. Assembly will be more convenient if you have a socket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches. 152 1 \ _71 _ 157 104 104 _'71 \ 157 104 6 2. Insert two M10 x 65mm C...