Iniciar sesión:
Votos - 2, Puntuación media: 5 ( )

Manual de usuario Life Fitness, modelo 8110

Fabricar: Life Fitness
Tamaño del archivo: 579.68 kb
Nombre del archivo: fe08d368-056f-4c60-8754-5326d6f2b90f.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function. * We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water. Touch-up paint can be purchased from your LIFE FITNESS customer service representative at (800) 328-9714. There is a risk assumed by individuals who use this type of equipment. To minimize risk, please follow these rules: 1. Inspect equipment daily. Tighten all loose connections and replace worn parts immediately. Failure to do so may result in serious injury. 2. Do not allow minors or children to play on or around this equipment. 3. Exercise with care to avoid injury. 4. If unsure of proper use of equipment, call your local LIFE FITNESS STRENGTH distributor or call the LIFE FITNESS STRENGTH customer service department at (800) 328-9714. 5. Consult your physician before beginning any exercise program. Tools Required for Assembly * 3/4” wrench, 9/16” wrench * Ratchet with 3/4” socket * 7/32” Allen wrench * Tape measure Bolt Length Ruler NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT. BOLT LENGTH BOLT LENGTH RULER: 1/2 1/2 1/2 1/2 1/2 1/2 0 1 2 3 4 5 6 2 PARTS LIST KEY PART # DESCRIPTION QTY 1 6790803 UPRIGHT FRAME 2 2 6720202 DUMBBELL TIER 2 3 3102918 1/2 X 3-1/4” BOLT 8 4 3102502 1/2” WASHER 8 5 3102801 1/2” LOCKNUT 8 6 3102802 3/8” LOCKNUT 40 7 3108402 3/8 X 1 1/2” FLT HD CAP SCREW 40 8 3203201 DUMBBELL SADDLE 40 • SECURELY assemble the DUMBBELL TIERS (2) between the UPRIGHT FRAMES (1) using eight 1/2 X 3-1/4” BOLTS (3), eight 1/2” WASHERS (4), and eight 1/2” LOCKNUTS (5) as shown in FIGURE 1. 3 STEP 2: • SECURELY assemble forty DUMBBELL SADDLES (8) to the DUMBBELL TIERS (2) using forty 3/8 X 1-1/2” FLAT HEAD CAP SCREWS (7) and forty 3/8” LOCK NUTS (6) as shown in FIGURE 2. Thank you for purchasing the LifeFitness 8110 DUMBBELL RACK. If unsure of proper use of equipment, call your local LifeFitness distributor or call the LifeFitness customer service department at (800) 328-9714. 4...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría