Votos - 4, Puntuación media: 4.3 ( )

Fabricar: Precor Tamaño del archivo: 3.68 mb Nombre del archivo: Idioma del manual:

If you enable the safety code, your patrons will need to enter four number keys in sequence to begin their exercise session and, on the treadmill, start the running belt. If the correct keys are not pressed within two minutes, further access is denied. For more information, refer to Entering the Safety Code. 1. At the SAFETY CODE prompt, press OK. Use the navigational arrow keys to alternate between the two selections. Setting Description ENABLED Causes the safety code prompt to appear prior to a workout and when returning from pause mode. DISABLED Does not require a safety code to operate. CAUTION: Do not assume the equipment is safe because of safety code protection. Never leave children unsupervised around the equipment. 2. When you are ready, press OK to accept the displayed setting and move to the next feature. For further options, refer to the table in Accessing Club Programming Mode and Changing the Settings. 19 Choosing a Language The equipment can display user prompts, text, and user entries in several different languages. When the equipment is shipped from the factory, it is set to display English. Note: Programming prompts are not affected by language selection. The prompts in this section continue to appear in English. 1. At the SELECT LANGUAGE prompt, press OK. Use the navigational arrow keys to choose a language. 2. When you are ready, press OK to accept the displayed setting and move to the next feature. For other options, refer to the table in Accessing Club Programming Mode and Changing the Settings. Product Owner's Manual: Club Features Selecting a U.S. Standard or Metric Display The equipment can display measurements in either Metric or U.S. Standard. The default factory setting is to display U.S. Standard. To change this setting, perform the following steps: 1. At the SELECT UNITS prompt, press OK. Use the navigational arrow keys to select a unit of measure (US or METRIC). CAUTION: If you change the Unit of Measure display on a treadmill, be sure to check the speed setting to verify that it is correct. Refer to Treadmill: Determining the Club Speed Limit. 2. When you are ready, press OK to accept the displayed setting and move to the next feature. For other options, refer to the table in Accessing Club Programming Mode and Changing the Settings. 20 Setting an Exercise Session Time Limit You can limit how long a user can exercise on the equipment. For example, if you set the time limit to 20 minutes, users can only enter a session time between 1 and 20 minutes. Note: The automatic cool-down period is appended to the end of any time-based program, so adjust the time limit accordingly. You can also let a user exercise indefinitely by selecting NO LIMIT. However, you will need to instruct users that once they select a program, they must press the TIME +/- key. A workout time blinks in the display. They need to use the Number Keypad to type in 240, press the up arrow key to display NO LIMIT, and then press OK. Product Owner's Manual: Club Features The exercise session times available are between 1 and 240 minutes. Note: The Military Performance Programs will not complete if the maximum exercise time limit is less than 40 minutes. Set the maximum session time above 40 minutes if you have allowed users to access these programs. Refer to Treadmill: Accessing Performance Programs. 1. At the SET MAX WORKOUT TIME prompt, press OK. Use the navigational arrow keys to change the displayed time limit. Note: When you press and hold a navigational arrow key, the number increments by five, for example, 1,5, 10, 15, 20. When you tap an arrow key, the number increments by one. 2. When you are ready, press OK to accept the displayed setting and move to the next feature. For other options, refer to the table in Accessing Club Programming Mode and Changing the Settings. 21 Setting a Pause Time Limit You can limit how long a user can pause while exercising on the equipment by entering a time between 1 and 120 seconds (two minutes). For example, if you set a pause time limit of 60 seconds, the display automatically resets to the Precor banner if no movement is detected and no key press occurs for one minute. Important: The optional power adapter must be connected on self-powered equipment to establish a definitive pause time limit. If the optional power adapter is not attached and the rate of motion drops below the minimum requirements, the equipment begins its 30-second shutdown, effectively eliminating pause mode. Refer to the table in Self-Powered Features. 1. AttheSET MAX PAUSE TIM E prompt, press OK. Use the navigational arrow keys to change the time limit. Choose between 1 and 120 seconds (two minutes). 2. When you are ready, press OK to accept the displayed setting and move to the next feature. For other options, refer to the table in Accessing Club Programming Mode and Changing the Settings. Product Owner's Manual: Club Features Setting a Cool-Down Time Limit You ...

Descargar ahora

Introduzca dos números de la imagen: