Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
Step 2 Attach Left Upright and Right Upright to Base using Allen Bolts M8x15 (Qty. 8) and Washer 9x22x2 mm (Qty. 8). Do not tighten bolts. Figure 4 Step 1 Attach Console to Left and Right Uprights using Washers (Qty 4) and Allen Bolts (Qty 4). Assembly 8 Figure 5 Step 1 Connect the Console Harness (left side), Incline Harness (left side), EKG Harness (left and right side), and Speed Harness (right side) to Harness coming from Console. Step 2 Attach the Left Junction Box as shown. Step 3 Repeat for Right Junction Box. Console Right Upright Left Upright Left Junction Box Incline Harness EKG Harness Console Harness Left Junction Box Philip Screw ST4.2*13 Figure 5 Figure 6 Figure 6 Step 1 Secure Console and Junction Boxes to Uprights using Philip Screw ST4.2*13 (Qty 4). Assembly 9 Congratulations!! You have completed the assembly of your new Keys 5500T Treadmill. Right Fender Philip Screw ST4.2*13 Philip Screw ST4.2*13 Philip Screw M6*12 Philip Screw M6*12 Figure 7 Step 1 Tighten all Hardware. Step 2 Secure Right Fender using one Philip Screw ST4.2*13 and one Philip Screw M6*12. Step 3 Repeat for Left Fender. Figure 7 Moving Instructions CAUTION! TO AVOID THE RISK OF INJURY, NEVER ATTEMPT TO MOVE THE TREADMILL WHILE IT IS IN THE UNFOLDED OPERATING POSITION. TO REDUCE THE POSSIBILITY OF INJURY WHILE LIFTING, BEND YOUR LEGS AND KEEP YOUR BACK STRAIGHT. AS YOU RAISE THE TREADMILL, LIFT USING YOUR LEGS, NOT YOUR BACK. IN ORDER TO RAISE OR LOWER THE TREADMILL SAFELY, YOU MUST BE ABLE TO LIFT 45 POUNDS (20KG). IT IS SUGGESTED YOU ALWAYS USE THE AID OF A SECOND PERSON WHEN MOVING THE TREADMILL. With the treadmill in the folded locked position (safety latch is engaged), grasp the handrail and place one foot on the center of the base crossbar as shown in the photo below. Next, with a firm grasp on the handrail, carefully tilt the treadmill back until it rolls freely on the wheels. Using extreme caution, move the treadmill to the desired location. To set the treadmill down, place one foot on the center of the base crossbar and carefully lower treadmill onto base in resting position. Do not attempt to move the treadmill over an uneven or rough surface. Note: The treadmill pictured below may not be identical to your particular model. 10 Power Requirements IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT. IF PLUG WILL NOT FIT THE OUTLET, HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN. This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes, surges, and noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the possibility of treadmill damage, always use a dedicated surge protector (not included) with your treadmill. Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet surge protector with UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with UL suppressed voltage rating of 400V or less and an electrical rating of 120VAC, 15 amps. This treadmill must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance for electric current should the treadmill malfunction. This treadmill comes with an electrical cord with an equipment-grounding conductor and a grounding plug. Always plug the power cord into a surge protector, and plug the surge protector into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Do not connect other equipment to the surge protector or this could cause permanent damage to your treadmill. This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug illustrated in the drawing below. 11 Console Panel Functions There are five display windows on the control panel to provide feedback information. TIME / PACE WINDOW: TIME: Indicates elapsed time after pressing start in minutes and seconds (0-99 minutes, 0-59 seconds) INTERVAL TIME: Indicates countdown in seconds to the next interval starting at 5 seconds and counting to 0 seconds. CALORIES / DISTANCE WINDOW: CALORIES: Indicates estimated calories used based on 150 lb. person at the indicated speed, incline, and time. DISTANCE: Indicates Miles or Kilometers traveled in .01 increments up to 9.99 and .1 increments starting at 10.0 INCLINE / PULSE WINDOW: INCLINE: Indicates incline in percent of grade 0-10% in 0.5 increments. SPEED WINDOW: SPEED: Indicates MPH (miles per hour) or KPH (kilometer per hour) in .1 increments. CENTER BRICKYARD WINDOW Displays quarter mile track in Manual mode. Indicates position on track by a blink. In program mode, shows the change in speed profile across the interval range (1-10) and shows posit...