Votos - 4, Puntuación media: 3.5
(
)
)
|
Resumen del manual
This equipment is intended to use indoor. 3. Position the equipment on a clear, leveled surface. Make sure the surfaces are free of objects that may cause tipping over. 4. Always wear appropriate workout clothing when exercising. 5. Disabled person should not use the equipment without a qualified person or physician in attendance. 6. Never use the equipment if it is not functioning properly. 7. Before exercising, always do stretching exercises to properly warm up. 8. Maximum user weight is 250 lbs. 9. If the user experience dizziness, nausea, chest pain, or any other abnormal symptoms, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY. Care and Maintenance 1. Periodically inspect all parts for tightness and tighten as required. 2. Replace any worn and damaged part immediately. 3. Use mild household spray cleaners and/or a damp rag to wipe clean. Do not use harsh cleaning chemicals. 4. Sand rusted areas on tubular members and repaint using a non-lead based paint meeting the requirements of Title 16 CFR Part 1303. 5. Disposal Instructions - The equipment can be safely disassembled and disposed without unreasonable hazards. Call your local recycle agency regarding details of recycling. Save the Instructions. WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH PREEXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC. ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT. SAVE THESE INSTRUCTIONS. Impex Fitness Products 14777 Don Julian Road City Of Industry, CA 91746 06-10-08 Phone: 1-800-999-8899 Fax:(626)961-9966 Email: info@impex-fitness.com ASSEMBLY INSTRUCTION Plastic Threaded Cap Connector Step-1 Turn the Jumping Surface (#1) over. There are plastic caps covering the threaded connector where the Legs will mount on. Remove these caps and discard. Step-2 Insert the Leg (#2) through the sleeve on the Handrail Support (#3), and then firmly thread the Leg onto the threaded connector. Skip the next open connector and repeat same procedure to mount the other Balance Bar Support and Leg onto the 3rd open threaded connector. Step-4 Connect the two Handrails (#5) and securely tighten together with the screws on the Handrail. Step-5 Insert the two Handrails (#4) into the Handrail Supports (#3). Use the lock knob on the Handrail (#4) to firmly lock the Handrail in position. PARTS LIST #1 Jumping Surface Qty (1) #2 Leg Qty (8) #3 Handrail Support Qty (2) #4 Handrail Qty (2) LIMITED WARRANTY IMPEX Inc. ("IMPEX®") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IMPEX's obligation under this Warranty is limited to replacing or repairing, at IMPEX's option. All returns must be pre-authorized by IMPEX. Pre-authorization may be obtained by calling IMPEX Customer Service Department at 1-800-999-8899. All freights on products returned to IMPEX must be prepaid by the customer. ORDERING REPLACEMENT PARTS Replacement parts can be ordered by calling our Customer Service Department toll-free at 1-800-999-8899 during our regular business hours: Monday through Friday, 9 am until 5 pm Pacific standard time. info@impex-fitness.com IMPEX® INC. 14777 Don Julian Road, City of Industry, CA 91746...