Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
1 IMPORTANT SAFETY NOTICES..................................................................... 2 HARDWARE PACK……….....…....................................................................... 4 ASSEMBLY INSTRUCTIONS........................................................................... 5 EXPLODED DIAGRAM.........................................................................………. 8 PARTS LIST...................................................................................................... 9 WARRANTY.................................................................................................…. 10 ORDERING PARTS.......................................................................................… 10 BEFORE YOU BEGIN Thank you for selecting the APEX Dumbbell Rack DBR-92 by IMPEX® INC. For your safety and benefit, read this manual carefully before using the machine. As a manufacturer, we are committed to provide you complete customer satisfaction. If you have any questions, or find there are missing or damaged parts, we guarantee you complete satisfaction through direct assistance from our factory. To avoid unnecessary delays, please call our TOLL-FREE customer service number. Our Customer Service Agents will provide immediate assistance to you. Toll-Free Customer Service Number 1-800-999-8899 Mon. - Fri. 9 a.m. - 5 p.m. PST info@impex-fitness.com 1 IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precautions: 1. Keep children and pets away from the machine at all times. DO NOT leave children unattended in the same room with the machine. 2. Only one person at a time should be using the machine. 3. If the user experiences dizziness, nausea, chest pain, or any other abnormal symptoms, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY. 4. Position the machine on a clear, leveled surface. DO NOT use the machine near water or outdoors. 5. Keep hands away from all moving parts. 6. Always wear appropriate workout clothing when exercising. DO NOT wear robes or other clothing that could become caught in the machine. Running or aerobic shoes are also required when using the machine. 7. Use the machine only for its intended use as described in this manual. DO NOT use attachments not recommended by the manufacturer. 8. Do not place any sharp object around the machine. 9. Disabled person should not use the machine without a qualified person or physician in attendance. 10. Before using the machine to exercise, always do stretching exercises to properly warm up. 11. Never operate the machine if the machine is not functioning properly. 12. Maximum weight capacity for the rack: 500 lbs. WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC. ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT. SAVE THESE INSTRUCTIONS. 2 WARNING LABEL REPLACEMENT The Warning Label shown here has been placed on the Stabilizer. If the label is missing or illegible, please call customer service at 1-800-999-8899 for replacement. Apply the label in location shown. 3 HARDWARE PACK 4 ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: One Adjustable Wrench and Allen Wrench NOTE: It is strongly recommended this machine be assembled by two or more people to avoid possible injury. STEP 1 (See Diagram 1) A.) Connect the Left Stabilizer (#3) to the Left Upright Beam (#1). Secure the side with two M10 x 3 .” Allen Bolts (#13), four . .” Washers (#9), and two M10 Aircraft Nuts (#14). Secure the Bottom with one M10 x 5/8” Allen Bolt (#10) and O .” Washer (#9). Do NOT tighten all the Nuts and Bolts yet. B.) Repeat the above procedure A to Connect the Right Stabilizer (#4) to the Right Upright Beam (#2). DIAGRAM 1 5 STEP 2 (See Diagram 2) A.) Connect the Left & Right Upright Beams (#1 & #2) with one Dumbbell Rack (#5) on the top level. Align the holes then secure each end of the Rack with one M10 x 2 .” Allen Bolt (#12), two . .” Washers (#9), and one M10 Aircraft Nut (#14). Repeat the same step to install the other Dumbbell Rack. Do not tighten the nuts and bolts yet. B.) Repeat Procedure A above to install two Dumbbell Racks to the second level. C.) Repeat Procedure A above to install two Dumbbell Racks to the third level. Tighten all Nuts and Bolts previously installed. DIAGRAM 2 6 STEP 3 (See Diagram 3) A.) Insert a Weight Post (#6) into the hole on the side of the Left Upright Beam (#1). Secure it with a M10 x 1 1/8” Allen Bolt (#11) and . .” Washer (#9). B.) Slide an Olympic Sleeve (#8) onto the Weight Post. Repe...