Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
.” Washers (#31), and M10 Aircraft Nuts (#35). D.) Attach the Spring (#15) to the Stopper (#16). Push the Stopper into the hole on the post on the Main Frame. Align the slot on the Stopper with the open slot on the post. Insert the Lever (#5) through the open slot on the post into the slot on the Stopper. E.) Attach the Cross Brace (#1) to the Main Frame (#3). Secure it with two M10 x 2 .” Carriage Bolts (#46), . .” Washers (#31), and M10 Aircraft Nuts (#35). Tighten all nuts and bolts previously installed. DIAGRAM 1 4 STEP 2 (See Diagram 2) A.) Slide a . 1 .” Plastic Spacer (#49) onto the Axle on the Adjustment Plate (#4). Insert the Axle through the Pivot Barrel on the Main Frame. Slide another Spacer onto the Axle. B.) Slide the Weight Holder (#7) onto the Axle and align the holes. Insert a Roll Pin (#12) through the hole and drive it in with a hammer. C.) Attach the Leg Developer Frame (#19) onto the Axle on the Adjustment Plate (#4). Secure it with one M10 x .” Allen Bolt (#28) and .1 3/8” Washer (#27). D.) Slide the Knee-lock Frame (#13) onto the pivot axle on the Main Frame. Secure it with one M10 x .” Allen Bolt (#28) and .1 3/8” Washer (#27). E.) Attach the open bracket on the Handle (#6) to the Seat Support (#2). Secure it with two M10 x 2 .” Carriage Bolts (#46), . .” Washers (31), and M10 Aircraft Nuts (#35). DIAGRAM 2 5 STEP 3 (See Diagram 3) A.) Attach the Seat Pad (#18) to the Seat Support (#2). Secure it with four M8 x 2 1/8” Allen Bolts (#52) and . 5/8” Washers (#43). B.) Attach the Backrest Board (#9) to the Backrest Adjustment Frame (#8). Secure it with two M8 x 1 3/8” Allen Bolts (#48) and . 5/8” Washers (#43). Insert the Backrest Adjustment Frame (#8) into the opening on the Seat Support (#2). Secure it with a Lock Knob. C.) Slide a . 2” Washer (#10) onto the tube on the Knee-lock Frame (#13). Push the 18” Roam Roll (#14) onto the tube. Secure it with a . 2 1/8” Nylon Washer (#21) and a M10 x .” Allen Bolt (#28). D.) Repeat Step C above to install the other 21” Foam Roll (#20). E.) Attach the Olympic Sleeve (#38) onto the Weight Holder (#7). Clip the Spring Clip (#40) onto the Olympic Sleeve. DIAGRAM 3 6 7 PARTS LIST KEY NO. DESCRIPTION Q’ty Cross Brace 1 Seat Support 1 Main Frame 1 Adjustment Plate 1 Lever 1 Handle 1 Weight Holder 1 Backrest Adjustment Frame 1 Backrest Board 1 . 2” Washer 2 Stabilizer 1 Roll Pin 1 Knee-lock Frame 1 Knee-lock Foam Roll (18”) 1 Spring 1 Stopper 1 Bumper 1 Seat Pad 1 Leg Developer Frame 1 Leg Developer Foam Roll (21”) 1 . 2 1/8” Nylon Washer 2 Lever Handle 1 Lever Knob 1 T-shaped Pull Pin 2 Roller Wheel 2 Bearing 4 . 1 3/8” Washer 2 M10 x .” Allen Bolt 4 Handle Grip 2 Sleeve 2 . .” Washer 10 M10 x 3 .” Carriage Bolt 4 2” x 2 .” Horse Shoe End Cap 4 M10 x 1” Round Allen Bolt 4 M10 Aircraft Nut 10 Lock Knob 1 M8 x .” Screw 1 Olympic Sleeve 1 Olympic Sleeve End Cap 1 Spring Clip 1 Spring Clip Sleeve 2 M8 x 1 5/8” Allen Bolt 3 . 5/8” Washer 11 2” Square End Cap 3 1 .” Square End Cap 3 M10 x 2 .” Carriage Bolt 6 1” Square End Cap 4 M8 x 1 3/8” Allen Bolt 2 . 1 .” Plastic Spacer 2 M8 Aircraft Nut 2 2” x 2” End Cap 1 M8 x 2 1/8” Allen Bolt 4 8 IRON GRIP SPORT By IMPEX FITNESS PRODUCTS LIMITED LIFE TIME WARRANTY IMPEX FITNESS PRODUCTS ("IMPEX") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of LIFE TIME on the Frame and Weld, 3 YEARS on parts, and 6 MONTHS on upholstery from the date of purchase. This warranty extends only to the original purchaser. IMPEX's obligation under this Warranty is limited to replacing or repairing, at IMPEX's option. All returns must be pre-authorized by IMPEX. Pre-authorization may be obtained by calling IMPEX Customer Service Department at 1-800-999-8899. All freights on products returned to IMPEX must be prepaid by the customer. This warranty does not extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an IMPEX authorized service center or for products used for heavy commercial or rental purposes. No other warranty beyond that specifically set forth above is authorized by IMPEX. IMPEX is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or other damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyments or use, costs of removal, installation or other consequential damages or whatsoever natures. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you. The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein. Some states do not allow limitations on ho...