Votos - 4, Puntuación media: 4.3
(
)
)
|
Resumen del manual
Lift the chair back onto its Base. 2 27 Shipping Bracket 2 4 27 26 26 Place all parts of the massage chair in a cleared area and remove the packing materials. Do not dispose of the packing materials until the massage chair is fully assembled. Assembly requires only the included allen wrench. ASSEMBLY 27 2 4 27 26 26 20 1 5 7 Posts 1 20 3 31 1 31 Top View 4. See the inset drawing. Remove the rubber bands from the screws. Be sure that the Arm Brackets (31) inside the tubes on the left side of the Base (1) are pressed against the indicated sides of the tubes. Align the posts on the Left Armrest (6) with the tubes on the Base (1). Slide the Left Armrest onto the Base. You may need to flex the posts away from the Left Side Shield (8) to assemble it past the Bracket Screws (32) in the Base. Attach the Pillow (13) to the fastener strip. 5. Raise the footrest by pulling on the Footrest Control Arm (23, not shown). Attach the lower end of the Right Side Shield (7) to the right side of the Base (1) with two Arm Cover Screws (35). Attach the lower end of the Left Side Shield (not shown) to the left side of the Base (1) with two Arm Cover Screws (not shown). Using the included allen wrench, tighten the four Bracket Screws (32) in the right side of the Base (1). Tighten the four Bracket Screws (not shown) in the left side of the Base (1). 6. Plug the cord from the Hand Control (22) into the socket on the back of the massage chair. Be sure to align the indicated tabs. 5 4 131 31 1 8 6 32 13 32 32 35 7 1 22 Socket Tabs 6 Note: Parts of the chair are cut away for clarity 7 HOW TO OPERATE THE MASSAGE CHAIR HOW TO PLUG IN THE POWER CORD DANGER: Improper connection of the equipment-grounding conductor can result in an increased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the productNif it will not fit the outlet, have a proper outlet installed by a qualified electrician. Your massage chair, like any other type of sophisticated electronic equipment, can be seriously damaged by sudden voltage changes in your homeOs power. Voltage surges, spikes, and noise interference can result from weather conditions or from other appliances being turned on or off. To decrease the possibility of your massage chair being damaged, always use a surge suppressor with your massage chair (see drawing 1 below). Surge suppressors are sold at most hardware stores and department stores. Use only a single-outlet surge suppressor that is UL 1449 listed as a transient voltage surge suppressor (TVSS). The surge suppressor must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation of 450 joules. The surge suppressor must be electrically rated for 120 volts AC and 15 amps. This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of e...
Otros modelos de este manual:Formadores - 831.219910 (800.52 kb)
Formadores - 831.219910 (800.52 kb)
Formadores - 831.219910 (800.52 kb)
Formadores - 831.219910 (800.52 kb)