Iniciar sesión:
Votos - 4, Puntuación media: 4.3 ( )

Manual de usuario Image, modelo KPS-LEGM

Fabricar: Image
Tamaño del archivo: 545.05 kb
Nombre del archivo: f5e1290d-d11a-4712-9c6c-b135c5290494.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


Keys Fitness and our Power System Series assures the very best in value, appearance, durability and biomechanics. This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at our Keys Fitness Helpline. We have trained service technicians on site to take care of you, our valued customer. REGISTRATION CARD To avoid unnecessary delays in warranty parts and to insure that a permanent record of your purchase is on file with our company, be sure to send in the warranty registration card or register on-line at within 10 days of purchase. POWER SYSTEM SERIES MODEL: KPS-LEGM QUESTIONS? • CALL 1-800-683-1236 Monday-Friday 8:30-5:30 Central Time When calling please have the following product information available: • Product Series • Model # • Part Number • Part Description BEFORE YOU START Prior to assembly, remove components from the box and verify that all the listed parts were supplied. SAFETY INFORMATION WARNING! Before using this unit or starting any exercise program, consult your physician. This is especially important for persons over the age of 35 and/or persons with pre-existing health problems. Keys Fitness Products LP assumes no responsibility for personal injury or property damage sustained by or through the use of this product. It is the owner’s responsibility to ensure that all users of this unit have read the Owner’s Manual and are familiar with safety information and precautions. SAFETY PRECATIONS • This Power System unit should only be used on a level surface and is intended for indoor use only. Keys Fitness recommends an equipment mat be placed under the unit to protect the floor or carpet and for easier cleaning. • Wear comfortable, good-quality walking or running shoes and appropriate clothing. Do not use this unit with bare feet, sandals, socks or stockings! • Always examine your unit before using to ensure all parts are in working order. • Do not leave children unsupervised near or on the unit. • Service to your Power System unit should only be performed by an authorized service representative, unless authorized and/or instructed by a Keys Fitness technician. Failure to follow these instructions will void the warranty. • ASSEMBLY STEP 1 .. NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. Connect Front Frame (3) and Rear Base (2) to Main Frame (1) using: 4 x (19) Bolt 8 x (18) Washer 4 x (20) Nylon Lock Nut ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. .. STEP 2 Connect Swing Tube (8) to Swing Arm as shown using: 2 x (23) Bronze Bushing 1 x (26) Washer 1 x (27) Washer 1 x (28) Bolt Slide Big Roller Pad (39) onto Swing Tube (8) and secure using: 1 x (37) Collar 1 x (38) Plug 1 x (34) Allen bolt .. ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 3 Attach Right and Left Handles (11,12) using: 2 x (19) Bolt 4 x (18) Washer 2 x (20) Nylon Lock Nut STEP 4 Attach Side Angle Frame (4) using: 4 x (19) Bolt 8 x (18) Washer 4 x (20) Nylon Lock Nut STEP 5 Slide Stopper Prone (17) into Front Frame for range of motion limiter. .. STEP 6 Complete Adjustable Roller Pad Frame(10) as shown using: 2 x (43) Foam Pad 2 x (33) Big Plug Slide into frame and secure with Pop Pin. STEP 7 Slide Back Pad Adjustable Frame (9) into frame and secure with Pop Pin. ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. .. STEP 8 Attach Back Pad (16) using: 2 x (28) Bolt 2 x (27) Washer Connect Seat Pad (15) to Adjustable Seat Bracket (13) using: 4 x (28) Bolt 4 x (27) Washer Connect Adjustable Seat Bracket (13) to frame as shown using: 1 x (14) Shaft with Screw End 2 x (18) Washer 2 x (20) Nylon Lock Nut ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. PARTS LIST # DESCRIPTION QTY main frame 1 rear base 1 front frame 1 side angle frame 1 leg frame 1 circular plate w/shaft 1 weight holder 1 swing tube 1 back pad adjustable frame 1 adjustable roller pad frame 1 left handle 1 right handle 1 adjustable seat bracket 1 shalft with screw end 1 seat pad 1 back pad 1 stopper prone 1 washer 12 22 bolt M12X80 10 nylon lock nut M12 12 plate 2 long pop pin 1 bronze bushing ID25.4 4 split tension pin 1 plastic washer 46*26*3 1 washer 32*10.5*4 1 washer 10 7 bolt M10X25 7 spring clip 1 grease fitting 1 pop pin 2 L pin 1 big plug 25 2 allen bolt M8X6 2 plastic sleeve 50.8*44.5 4 plug 44.5 6 collar 2 plug 50.8 1 big roller pad 1 end cap 50.8 4 plastic tube 1 grip 2 foam pad 22*110*180 2 rubber sleeve 1 spring clip sleeve 2 • .. EXPLODED VIEW KEYS FITNESS PRODUCTS, L.P. POWER SYSTEM SERIES LIFETIME WARRANTY This Warranty applies in the United States and Canada to products manufactured or distributed by Keys Fitness Products, LP (“Keys”) under the KEYS brand name. The warranty period to the original purchaser is lifetime of the original purchaser. Keys warrants that t...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría