Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
'_ QUESTIONS? As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or if parts are damaged or missing, PLEASE DO NOT CONTACT THE STORE; please contact Customer Care. IMPORTANT: You must note the product model number and serial number (see the drawing above) before contacting us: CALL TOLL-FREE: 1-800-753-4645 Mon,-Fri, 6 a,m,-6 p,m, MST Sat, 8 a.m,-4 p.m, MST ON THE WEB: USER'S MANUAL new products, prizes, fitness tips, and much more! TABLE OF CONTENTS WARNING DECAL PLACEMENT .............................................................. 2 IMPORTANT PRECAUTIONS ................................................................ 3 BEFORE YOU BEGIN ...................................................................... 4 ASSEMBLY ............................................................................... 5 HOW TO USE THE ELLIPTICAL EXERClSER .................................................. 12 MAINTENANCE AND TROUBLESHOOTING ................................................... 24 EXERCISE GUIDELINES ................................................................... 25 PART LIST .............................................................................. 28 EXPLODED DRAWING .................................................................... 30 ORDERING REPLACEMENT PARTS .................................................. Back Cover LIMITED WARRANTY .............................................................. Back Cover WARNING DECAL PLACEMENT The warning decals shown here have been applied in the locations shown. If a decal is missing or illegible, call the telephone number on the front cover of this manual and request a free replacement decal. Apply the decal in the location shown. Note: The decal may not be shown at actual size. IMAGE is a registered trademark of ICON IP, Inc. 2 IMPORTANT PRECAUTIONS BEFORE YOU BEGIN Thank you for selecting the new IMAGE _ 9.5 elliptical exerciser. The iMAGE 9.5 is an incredibly smooth exerciser that moves your feet in a natural elliptical path, minimizing the impact on your knees and ankles. Welcome to a whole new world of natural, elliptical- motion exercise. For your benefit, read this manual carefully before you use the exercise cycle, If you have questions after reading this manual, please see the front cover of this manual. To help us assist you, note the product Console Pulse Sensor Water Bottle Holder (no bottle is included) Upright Pedal Arm Side Shield Pedal Disk model number and serial number before contacting us. The model number and the location of the serial number decal are shown on the front cover of this manual. To avoid a registration fee for any service needed under warranty, you must register the elliptical exerciser at www, imageservice,com/registration, Before reading further, please familiarize yourself with the parts that are labeled in the drawing below. Fan I_ Upper Body Arm Ramp Wheel Leveling Foot Pedal ASSEMBLY To hire an authorized service technician to assemble the elliptical exerciser, call 1-800-445-2480. Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. Assembly requires the included hex keys and your own adjustable wrench ___, Phillips screwdriver _, and rubber mallet c__ _J As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the parts bag, check to see if it has been preassembled. Star Washer M8 Split M8 Washer M8 Large Wave Washer Large Wave (85)-6 Washer (95)-2 (64)-4 Washer (81)-2 (27)-2 Washer (20)-2 M4 x 16mm M8 Nylon M10 Nylon Round Head M4 x 19mm M4 x 22mm M8 x 25mm Patch Locknut (87)-2 Locknut (84)-4 Screw (93)-4 Screw (68)-6 Screw (66)-2 Screw (70)-6 M8 x 69mm Button Bolt (91)-2 M10 x 77mm Carriage Bolt (58)-4 M8 x 63mm Bolt Set (67)-2 1, Attach the Rear Stabilizer (35) to the Frame (1) with two M10 x 77mm Carriage Bolts (58) and two M10 Nylon Locknuts (84). Attach the Front Stabilizer (3) to the Frame (1) with two M10 x 77mm Carriage Bolts (58) and two M10 Nylon Locknuts (84). 58 3 6 . Apply a generous amount of the included grease to the Ramp Axle (74). Have a second person hold the Ramp (78) near the Frame (1) in the position shown. Insert the Ramp Axle (74) through the Ramp and the Frame. Tighten an M8 x 25mm Patch Screw (70), with an M8 Washer (64) and a Ramp Cover (59), into each end of the Ramp Axle. 78 59 64 Next, pull the Ramp Pin (90) and align the Ramp (78) with one of the three holes in the Frame (1). Then, release the Ramp Pin into the Frame. Make sure the Ramp Pin is firmly en...