Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
HP StorageWorks
About this document
This document details procedures for installing an optional drive
2000 Family Modular Smart
module into an HP StorageWorks 2000 Family Modular Smart
Array.
Array
NOTE:
Make sure you obtain the latest version of these
optional drive module
instructions from http://www.hp.com/go/msa. Select MSA SAN
Arrays, select your product, and go to Support.
installation instructions
Before you begin
CAUTION:
Removing an air management module impacts the
airflow and cooling ability of the device. To avoid possible
overheating, insert the new drive module as quickly as possible. If
the internal temperature exceeds acceptable limits, the enclosure
may overheat and automatically shut down or restart.
CAUTION:
Parts can be damaged by electrostatic discharge.
Use proper anti-static protection:
• Keep the replacement component in the ESD bag until needed.
• Wear an ESD wrist strap grounded to an unpainted surface of
the chassis.
• If an ESD wrist strap is unavailable, touch an unpainted surface
of the chassis before handling the component.
• Never touch connector pins.
Removing air management modules
2.5-inch air management modules
1. Squeeze the top and bottom latch release buttons to disengage
Printed on at least 50% total recycled fiber with at least 10%
the module.
post-consumer paper
© Copyright 2008 Hewlett-Packard Development Company, L.P.
Second edition: November, 2008
Product names mentioned herein may be trademarks of their
respective companies as reflected by an associated footnote. The
information in this document is subject to change without notice.
Printed in China.
www.hp.com
486857-002
Page 1
...