Iniciar sesión:
Votos - , Puntuación media: ( )

Manual de usuario HP, modelo HP 4400 Dual Controller Enterprise Virtual Array w/Embedded Switch

Fabricar: HP
Tamaño del archivo: 1.63 mb
Nombre del archivo:

Idioma del manual:en

El documento se está cargando, por favor, espere
Descargar ahoraCerca
El documento se está cargando, por favor, espere
Descargar ahoraCerca


Otros manuales para este modelo:

Resumen del manual




HP StorageWorks
About this document
disk enclosure backplane
For the latest documentation, go to http://www.hp.com/support/
manuals, and select your product.
replacement instructions
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the
express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional
warranty. HP shall not be liable for technical or editorial errors or
omissions contained herein.
WARRANTY STATEMENT: To obtain a copy of the warranty for this
product, see the warranty information website: http://www.hp.com/
go/storagewarranty
These instructions apply to the MSA6X/7X, Proliant
Before you begin
DL320S, EVA4400, EVA6400, and EVA8400 product
families.
Observe the following precautions when replacing the backplane.
CAUTION:
Parts can be damaged by electrostatic discharge. Use proper
anti-static protection. Refer to the documentation that shipped
with your system for additional information.
Slate blue-colored items, such as the backplane thumbscrews,
means their attached component is not hot-swappable. Power
to the enclosure must be shut down before the component is
removed.
© Copyright 2009 Hewlett-Packard Development Company, L.P.
Before replacing the backplane, verify its failure by checking the LED
status of the disk drives as described in Table 1.
Second edition: February 2009
Table 1 Drive status LEDs
The information in this document is subject to change without notice.
Drive LED
Description
Printed in Puerto Rico
www.hp.com
• Flashing—Drive is spinning up or down and
is not ready.
Green (bottom)
• Solid—Drive is ready to perform I/O opera-
tions.
• Flickering—Indicates drive activity.
• Flashing blue—Used to locate drive.
Bi-color (top)
• Solid amber—Drive fault.
*533479-001*
Page 1

...

Otros modelos de este manual:
datos de dispositivos de procesamiento - HP 4400 Dual Controller Enterprise Virtual Array (1.63 mb)
datos de dispositivos de procesamiento - HP EVA6400 Array (1.63 mb)
datos de dispositivos de procesamiento - HP EVA6400 for Storage Centric Rack (1.63 mb)
datos de dispositivos de procesamiento - HP EVA8400 Array (1.63 mb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría