Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Version: HP07
Description
HP StorageWorks Division announces the availability of updated firmware images for 10K RPM Fibre
Channel hard disk drives supported within the HP StorageWorks 3000/5000 and 4000/6000/8000
Enterprise Virtual Arrays.
Update recommendation Recommended
Product models
The table below lists the Fibre Channel hard disk drive models that are eligible for this upgrade.
Complete the upgrade of these disk drives at your earliest convenience.
HP disk drive part HP disk drive
Disk drive
Previous firmware Current firmware
number
model number
description
version
version
293555-001
BD03655B28
36 GB 10K RPM
HP06
HP07
293555-002
BD07255B29
72 GB 10K RPM
HP06
HP07
293555-003
BD14655B2A
146 GB 10K RPM
HP06
HP07
Enhancements
The following enhancements are included in this release:
• The command aging default of Mode 0x00 now equals 1.2 seconds.
• The PLOGI response to Queue position and LIP logout has been corrected.
• Corrections have been made to minimize Bypass, Abort IOEDC, and Timeout errors during
sequential writes.
• Performance enhancements have been made to address drive hang or assert conditions.
• New assert recovery improvements ensure that the drive provides a check condition and then
returns to normal function.
• Improvements have been made to target-generated LIP (reset) behavior.
• Enhancements have been made to drive code SMART, error recovery, and sense code techniques.
Prerequisites
To upgrade multiple disk drives online without the data migration process, you must be running:
• VCS 3.100 or later on EVA3000/5000
• XCS 6.000 or later on EVA4000/6000/8000
• HP Command View EVA 6.0.2 or later
NOTE:
You can upgrade disk drives using the data migration process if required or preferred. See HP
StorageWorks Enterprise Virtual Array upgrading disk drive firmware read me first for instructions.
Installation instructions
HP recommends that you use the bundled firmware file to upgrade all hard disk drives rather than
manually upgrade the firmware on an individual disk drive. To upgrade al hard disk drives:
HP StorageWorks Enterprise Virtual Array 10K RPM Fibre Channel hard disk drive HP07 firmware update
3
...Otros modelos de este manual:
datos de dispositivos de procesamiento - HP EVA4000 Starter Kit (75 kb)
datos de dispositivos de procesamiento - HP EVA4000/6000/8000 Disk Arrays (75 kb)
datos de dispositivos de procesamiento - HP StorageWorks EVA3000 EMEA Bundles (75 kb)
datos de dispositivos de procesamiento - HP StorageWorks EVA4000 SAN Starter Kit (75 kb)