Document Outline

• HP StorageWorks NAS e7000 v2 Maintenance and Service Guide
• Contents
• About this Guide
  • Overview
    • Intended Audience
    • Prerequisites
  • Conventions
    • Document Conventions
      • Table 1: Document Conventions
    • Text Symbols
    • Equipment Symbols
  • Rack Stability
  • Getting Help
    • HP Technical Support
    • HP Storage Website
    • HP Authorized Reseller
• Chapter 1: Illustrated Parts Catalog
  • Mechanical Components Exploded View
    • Figure 1: Mechanical components exploded view
  • Mechanical Components Spare Parts List
    • Table 2: Mechanical Components Spare Parts List
  • System Components Exploded View
    • Figure 2: System components exploded view
  • System Components Spare Parts List
    • Table 3: System Components Spare Parts List
• Chapter 2: Removal and Replacement Procedures
  • Safety Considerations
    • Electrostatic Discharge
    • Symbols on Equipment
    • Rack Warnings and Cautions
    • Server Warnings and Cautions
  • Preparation Procedures
    • Locating and Removing the Torx T-15 Tool
      • Figure 3: Locating and removing the Torx T-15 tool
    • Extending the Server from the Rack
      • Figure 4: Loosening the front panel thumbscrews
      • Figure 5: Extending the server from the rack
      • Figure 6: Returning the server back into the rack
    • Opening and Removing the Rear Access Panel
      • Figure 7: Unlocking and sliding the rear access panel open
      • Figure 8: Opening the rear access panel
      • Figure 9: Removing the rear access panel
    • Removing the Front Access Panel
      • Figure 10: Removing the front access panel
    • Replacing the Access Panels
      • Figure 11: Replacing the front access panel
      • Figure 12: Lining up the guide marks
      • Figure 13: Installing the rear access panel
    • Powering Down the Server
    • Removing the Server from the Rack
      • Figure 14: Removing the server from the rack
  • Memory
    • Memory Replacement Guidelines
    • Memory Board Slot Locations
      • Figure 15: Memory board slots
      • Table 4: Memory Board Slots
    • Parts of the Memory Board
      • Figure 16: Parts of the memory board
      • Table 5: Parts of the Memory Board
    • Memory Board LEDs and Icons
      • Figure 17: Memory board LEDs and icons
      • Table 6: Advanced ECC (Standard) Memory LEDs
      • Table 7: Online Spare Memory LEDs
      • Table 8: Single-Board Mirrored Memory LEDs
      • Table 9: Hot-Plug Mirrored Memory LEDs
      • Table 10: Memory Board Icons
    • DIMM Installation Requirements
      • Additional Requirements for Online Spare Memory Technology
      • Additional Requirements for Single-Board Mirrored Memory Technology
      • Additional Requirements for Hot-Plug Mirrored Memory Technology
    • Removing a Memory Board
      • Figure 18: Removing a memory board
    • Removing a DIMM
      • Figure 19: Removing a DIMM
    • Installing a DIMM
      • Figure 20: Installing a DIMM
    • Installing a Memory Board
      • Figure 21: Installing a memory board
      • Table 11: Memory LED States on a Properly Configured Memory Board
    • Configuring the Memory
  • Hot-Plug Procedures
    • Hard Drive Blanks
      • Figure 22: Removing a drive blank
    • Hot-Plug SCSI Hard Drives
      • Drive Replacement Precautions
        • Figure 23: Removing a hot-plug SCSI hard drive
    • Power Supply Blank
      • Figure 24: Removing a power supply blank
    • Hot-Plug Power Supplies
      • Figure 25: Removing a hot-plug power supply
    • PCI and PCI-X Hot Plug Expansion Boards
      • Figure 26: PCI-X slot locations
      • Table 12: NAS e7000 v2 PCI-X Expansion Slots and Buses
      • Figure 27: PCI-X Hot Plug button
      • Figure 28: Pressing the PCI-X retaining clip
      • Figure 29: Removing a PCI-X Hot Plug expansion board
    • Performance Balancing
      • Table 13: Recommended PCI-X Expansion Slot Population Order
    • Hot-Plug Fans
      • Figure 30: Removing a hot-plug fan
  • Non-Hot-Plug Procedures
    • Slimline Drives
      • Figure 31: Removing a drive from a slimline drive bay
    • Front Bezel
      • Figure 32: Removing the exterior and interior chassis screws
      • Figure 33: Disengaging the locking tabs and removing the front bezel
    • Power Button/LED assembly
      • Figure 34: Removing the power button/LED assembly
    • Processor Air Baffle
      • Figure 35: Removing the processor air baffle
    • Processor Power Modules
      • Figure 36: Opening the processor retaining bracket
      • Figure 37: Removing a PPM
    • Processors
      • Figure 38: Opening the processor retaining bracket
      • Figure 39: Removing the processor/heatsink assembly
    • Non-Hot-Plug PCI-X Expansion Boards
      • Figure 40: Pressing the PCI-X retaining clip
      • Figure 41: Removing an expansion board from a non-hot-plug slot
    • PCI-X Expansion Board Basket
      • Figure 42: Removing the expansion board basket
    • PCI-X Hot Plug Board
      • Figure 43: Removing the PCI-X Hot Plug board
    • SCSI Cables
      • Figure 44: Disconnecting SCSI cables from the backplane and expansion boards
    • Front Fan Cage
      • Figure 45: Removing the front fan cage
    • Pass-Through Board
      • Figure 46: Removing the pass-through board
    • Diagnostics Display Board and Lightpipe
      • Figure 47: Removing the removable media board
    • Rear Fan Cage
      • Figure 48: Removing the rear fan cage
    • Battery Backed Write Cache Assembly
      • Figure 49: Removing the BBWC enabler and 5i Plus Memory Module
    • SCSI Backplane
      • Figure 50: Removing the SCSI backplane
    • System Battery
      • Figure 51: Locating the battery on the system board
      • Figure 52: Removing the battery from the system board
    • System Board
      • Figure 53: Unscrewing the thumbscrews and sliding the system board
      • Figure 54: Removing the system board from the chassis
    • AC Filter Cable Assembly
      • Figure 55: Cutting the cable tie-wraps
      • Figure 56: Removing the cable clips
      • Figure 57: Removing the power supply connectors
      • Figure 58: Removing the AC filters
• Chapter 3: Diagnostic Tools
  • Automatic Server Recovery-2
  • Insight Manager 7
  • Integrated Management Log
  • Integrated Lights-Out Technology
  • Option ROM Configuration for Arrays (ORCA)
  • ROM-Based Setup Utility
  • ROMPaq Utility
  • System Online ROM Flash Component Utility
  • Quick Restore
  • SmartStart Support and Software
    • SmartStart Autorun Menu
    • Enterprise Diagnostics LX32 Utility
• Chapter 4: Connectors, LEDs, and Switches
  • Connectors
    • Rear Panel
      • Figure 59: Rear panel connectors
      • Table 14: Rear Panel Connectors
    • System Board
      • Figure 60: System board connectors
      • Table 15: System Board Connectors
    • SCSI Backplane Board
      • Figure 61: SCSI backplane board connectors
      • Table 16: SCSI Backplane Board Connectors
    • Memory Board
      • Figure 62: Memory board connectors and DIMM banks
      • Table 17: Memory Board Connectors and DIMM Banks
  • LEDs
    • Front Panel
      • Figure 63: Front panel LEDs
      • Table 18: Front Panel LEDs
    • QuickFind Diagnostic Display
      • Figure 64: QuickFind Diagnostic Display LEDs
      • Table 19: QuickFind Diagnostic Display LEDs
    • Interlock Status
      • Figure 65: Interlock LEDs
      • Table 20: Interlock LEDs
    • Hot-Plug SCSI Hard Drive
      • Figure 66: Hot-plug SCSI hard drive LEDs
      • Table 21: Hot-Plug SCSI Hard Drive LEDs
      • Table 22: Hot-Plug SCSI Hard Drive LED Combinations
    • Hot-Plug Fan
      • Figure 67: Hot-plug fan LED
    • Hot-Plug Power Supplies
      • Figure 68: Hot-plug power supply LEDs
      • Table 23: Hot-Plug Power Supply LEDs
    • PCI-X Hot Plug
      • Figure 69: External PCI-X Hot Plug LEDs
      • Table 24: External PCI-X Hot Plug LEDs
    • Network Interface Controller
      • Figure 70: Network Interface Controller LEDs
      • Table 25: Network Interface Controller LEDs
      • Figure 71: Internal PCI Hot Plug LEDs and button
      • Table 26: Internal PCI Hot Plug LEDs and Button
  • Battery-Backed Write Cache Enabler
    • Figure 72: Battery-backed write cache enabler LEDs
    • Table 27: Battery-Backed Write Cache Enabler LEDs
    • Memory Board
      • Figure 73: Memory board LEDs
      • Table 28: Advanced ECC (Standard) Memory LEDs
      • Table 29: Online Spare Memory LEDs
      • Table 30: Single-Board Mirrored Memory LEDs
      • Table 31: Hot-Plug Mirrored Memory LEDs
    • Internal Diagnostic Display
      • Figure 74: Internal diagnostic display LEDs and switches
      • Table 32: Internal diagnostic display switches
  • System Board Switches
    • System Maintenance Switch (SW4)
      • Figure 75: System maintenance switch (SW4)
      • Table 33: System Maintenance Switch (SW4)
      • Enabling ROMPaq Disaster Recovery Mode
    • System ID Switch (SW7)
      • Figure 76: System ID switch (SW7)
      • Table 34: System ID Switch (SW7)
    • iLO/Spread Spectrum Switch (SW8)
      • Figure 77: iLO/Spread Spectrum switch (SW8)
      • Table 35: iLO/Spread Spectrum Switch (SW8)
    • Non-Maskable Interrupt (NMI) Switch
      • Figure 78: Non-Maskable Interrupt (NMI) switch
    • Rear Unit Identification LED Switch
      • Figure 79: Rear Unit Identification LED switch
• Chapter 5: Troubleshooting
  • When the Server Does Not Start
  • Diagnostic Steps
    • Table 36: Diagnostic Steps
    • Table 37: Is the System Power LED Off?
    • Table 38: Is the System Power LED Green?
    • Table 39: Is the External Health LED Green?
    • Table 40: Is the Internal Health LED Green?
    • Table 41: Is the Monitor Displaying Information?
  • Problems After Initial Boot
    • Table 42: Problems After Initial Boot
  • ROMPaq Disaster Recovery
  • Other Information Resources
    • Table 43: Troubleshooting Resources
• Chapter 6: Specifications
  • Table 44: System Unit Specifications
• Index

---

...

Otros modelos de este manual:
datos de dispositivos de procesamiento - HP StorageWorks NAS e7000 Model 902 Europe (12.72 mb)
datos de dispositivos de procesamiento - HP StorageWorks NAS e7000 Model 904 (12.72 mb)
datos de dispositivos de procesamiento - HP StorageWorks NAS e7000 Model 904 Europe (12.72 mb)
datos de dispositivos de procesamiento - HP StorageWorks NAS e7000 v2 Server Only (12.72 mb)