Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
datos de dispositivos de procesamiento - HP StorageWorks 4400 Scalable NAS File Services for Linux (71.29 kb)
datos de dispositivos de procesamiento - HP StorageWorks 4400 Scalable NAS File Services for Linux (59.98 kb)
Resumen del manual
4.
Verify factory settings. Power up the cluster servers, start the cluster
HP websites
software, and verify that the cluster filesystems are visible on all
nodes.
For additional information, see the following HP websites:
5.
Configure the customer network interface on the cluster servers and
• http://www.hp.com
verify that the customer network is visible.
• http://www.hp.com/go/scalablenas
6.
Install the iLO license on each server.
Under Related Products, in the right-hand column, select 4400 Scal-
7.
Start HP Scalable NAS on each cluster server.
able NAS File Services.
8.
Set passwords for the switches, ABM, and cluster servers. Also
change the Command View password in the HP Scalable NAS
• http://www.hp.com/go/storage
snapshot configuration.
• http://www.hp.com/service_locator
9.
Test the cluster, verifying that all servers can see files on the filesys-
tems and can perform read and write operations.
10. Create an export group listing the filesystems that will be exported
via NFS and then associate a Virtual NFS Service with the export
group.
The filesystem configuration
The cluster is configured with three cluster filesystems that are mounted
at /psfs001, /psfs002, and /psfs003. Six disks in the EVA Default Disk
Group are used for these filesystems. The disks are configured into three
volumes with two vdisks each using 1MB stripes. Each vdisk in the volume
pair has one vdisk defaulting to use EVA 4000 controller A and the
other disk defaulting to use EVA 4000 controller B, striping the volume
across both controllers.
Where to go next
The following documents provide information about the HP StorageWorks
4400 Scalable NAS system and HP Scalable NAS File Serving Software:
• HP Scalable NAS File Serving Software 3.7.0 administration guide
(P/N AG513-96002). Appendix C describes the initial configuration
of the HP 4400 Scalable NAS system. The guide also describes how
to create new filesystems, configure Virtual NFS Servers and Export
Groups, monitor the cluster, and perform other cluster operations.
• HP Scalable NAS File Serving Software 3.7.0 command reference
guide (P/N AG513-96003). This document describes how to manage
the cluster from the command line.
• HP Scalable NAS File Serving Software 3.7.0 release notes (P/N
AG513-96006). This document describes product features and out-
standing issues.
The documents are available at the following web site:
http://www.hp.com/go/scalablenas
Under Related Products, in the right-hand column, select HP PolyServe
Software. Under Support, in the right-hand column of the HP PolyServe
Software page, select Support for your product.
Documents for Command View are available on the http://
www.hp.com/support/manuals page. Scroll to Storage, select Storage
Software, and then, under Storage Device Management Software, select
HP StorageWorks Command View EVA Software. See the following:
• HP Storage Works Command View EVA user guide. This document
describes how to use Command View to manage your storage.
Page 2
...Otros modelos de este manual:
datos de dispositivos de procesamiento - HP StorageWorks 4400 Scalable NAS File Services for Windows (85.45 kb)
datos de dispositivos de procesamiento - HP StorageWorks 4400 Scalable NAS for Linux File Services (85.45 kb)
datos de dispositivos de procesamiento - HP StorageWorks 4400 Scalable NAS for Windows File Services (85.45 kb)