Iniciar sesión:
Votos - 0, Puntuación media: 0 ( )

Manual de usuario HP, modelo HP 41B 4Gb 1-port PCIe Fibre Channel Host Bus Adapter

Fabricar: HP
Tamaño del archivo: 122.2 kb
Nombre del archivo:
Idioma del manual:enpt
Enlace gratuito para este manual disponible en la parte inferior de la página



Otros manuales para este modelo:

Resumen del manual


• Same discovery mechanism (i.e., First LUN/Auto/Flash under "Boot Device
Settings" in BIOS config menu or bcu CLI) should be used for al HBA port
instances for which the boot LUN is exposed.
• If multiple storage ports (having unique PWWNs) are configured to access the
same boot LUN in the storage array and al PWWNs are zoned to a specific
HBA port instance, then al such PWWNs must be listed under “Boot Device
Settings” in BIOS config menu or BCU.
Note: If BCU or HCM is used to configure a boot LUN, a reboot is required for
the change to be effective.
10. Windows 2008 x86 boot over SAN instal ation may suspend on some servers
(e.g. Del R900). To minimize this issue, instal the Brocade HBA in one of the
PCIE slots, while leaving the other slots empty. Then, instal Windows 2008 onto
a boot over SAN LUN connected to one of the HBA ports. Once the instal ation
is complete, shutdown the system to populate the rest of the empty slots.
11. In boot over SAN setup with Windows 2003 R2 SP2 x86 and a HDS AMS 1000
Array, the system may halt after the first reboot during the OS instal ation.
Reboot the system and continue with the instal ation.
12. For Windows 2003, the Windows device manager may require a manual re-scan
to show the current devices after a zone change.
13. Software Release 3.0 supports Windows 2003 in FC HBA mode only.
14. During PXE boot, in case the system gets stuck at boot.wim during the Windows
2008 R2 instal when using Window Deployment server, skip the BIOS by
pressing X to al ow the PXE boot process to continue.
15. In a Windows NIC team, transmit packets stats via SNMP might return in
accurate values. The values reported via HCM and BCU are accurate.
16. SNMP 'get bulk' query on "Vlan Table View" may report failure to connect to
SNMP Agent.
17. Instal ation of BNA and BFA drivers using Brocade Adapter Software Instal er
with the adapter hardware not instal ed may not complete on Windows 7 x86
System. User needs to press the Ctrl key immediately after launching the
instal er and hold it down until a console window appears and proceed with
instal ation.
18. When using Brocade Adapter Software Instal er (BASI), a pop-up window may
appear stating that the file ‘bninotify.dl ’ cannot be found. This is because the
instal er is referencing the wrong path. To correct the path, edit the ‘Copy files
from:’ field from "c:\program files (x86)\brocade\adapter\driver\net" to "c:\program
files\brocade\adapter\driver\net".
19. On Windows x86, setting Adapter Aliases from HCM might cause Agent to stop
responding. It is advisable to use Brocade Command line Utility (BCU) to set the
adapter alias.

Brocade Adapter v3.0.0.0 Release Notes Update 3
Page 15 of 18


...

Otros modelos de este manual:
datos de dispositivos de procesamiento - HP 42B 4Gb 2-port PCIe Fibre Channel Host Bus Adapter (122.2 kb)
datos de dispositivos de procesamiento - HP 81B 8Gb 1-port PCIe Fibre Channel Host Bus Adapter (122.2 kb)
datos de dispositivos de procesamiento - HP 81E 8Gb 1-port PCIe Fibre Channel Host Bus Adapter/S-Buy (122.2 kb)
datos de dispositivos de procesamiento - HP 81Q 8Gb 1-port PCIe Fibre Channel Host Bus Adapter/S-Buy (122.2 kb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría