Votos - , Puntuación media:
(
)
)
Fabricar: HP
Tamaño del archivo: 764.62 kb
Nombre del archivo:
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Otros manuales para este modelo:
Resumen del manual
HP recommends installing a dedicated host bus adapter. See the
HP RDX USB 3.0
RDX QuickSpecs for recommended products.
Removable Disk Backup System
NOTE: It is also possible to connect to a USB 2.0 Intel or HP 4-pin
header connector; appropriate cables must be purchased separately.
See the RDX QuickSpecs for recommended products and refer to the
User Guide for cabling instructions.
Internal drive
Start Here
Power cable
Commencez ici
Starten Sie hier
IMPORTANT INFORMATION ABOUT
USB cable
YOUR NEW DRIVE
• Connect to a USB 3.0 port (on a computer running Windows®).
USB 2.0 is supported, but performance will be degraded.
• For optimum performance use HP-branded RDX Removable Disk
cartridges.
• Although RDX Removable Disk cartridges are ruggedly built, they
must be handled with care to ensure data integrity and long life.
• To ensure correct operation of the eject function, install the HP RDX
Utility. This utility also allows you to download and install firmware
upgrades. The utility and firmware upgrades are available from
www.hp.com/support/rdx.
1 Installation overview
At ach USB cable to internal USB 3.0 port
Use the standard USB 3.0 cable supplied with the RDX Removable
IMPORTANT:
Disconnect your computer from the main
Disk Backup System.
power supply before installing the RDX Removable Disk
Backup System and observe anti-static precautions.
For important safety, environmental, and regulatory
information, see Safety and Compliance Information for
2 Completing the installation
Server, Storage, Power, Networking, and Rack Products,
Install the HP RDX Utility from www.hp.com/support/rdx. If the
available at www.hp.com/support/Safety-Compliance-
software is not installed, the eject but on and right-click eject method
EnterpriseProducts.
may not work properly.
Use a spare power cable to connect to the computer power
supply. (The drive is not powered from the USB bus.)
Install or update backup software:
For detailed, step-by-step installation instructions, refer to the
It is important to check www.hp.com/storage/spock for software
user guide found at www.hp.com/support/rdx.
compatibility and install any recommended updates.
Diagnostic tools
Mounting Screws
The HP RDX Utility contains basic diagnostic tools, enables proper
An accessory kit containing M3 screws is supplied with the HP RDX
cartridge ejection, and allows you to download and install firmware
USB 3.0 Internal Removable Disk Backup System for use with servers
upgrades. The utility and firmware upgrades are available from
that do not have the correct screws available.
www.hp.com/support/rdx.
Check server schematic for internal USB port
HP Library & Tape Tools, which can be downloaded free of charge
from www.hp.com/support/tapetools, can also be used to determine
Connect to a dedicated USB 3.0 port on your computer. The drive
whether your product can operate properly.
is backward compatible with USB 2.0, but performance will be
degraded. Do not connect to a USB 1.1 port. Use the schematic on
the inside of the door or consult your computer documentation to
locate the availability and position of a standard USB 3.0 Type A
socket. If a suitable internal port is not available on the system board,
...Otros modelos de este manual:
datos de dispositivos de procesamiento - HP RDX USB 3.0 Internal Docking Station (764.62 kb)
datos de dispositivos de procesamiento - HP RDX160 External Removable Disk Backup SmartBuy System (764.62 kb)
datos de dispositivos de procesamiento - HP RDX160 External Removable Disk Backup System (764.62 kb)
datos de dispositivos de procesamiento - HP RDX160 Internal Removable Disk Backup System (764.62 kb)