Votos - 5, Puntuación media: 4.2
(
)
)
|
Resumen del manual
Avoid pressing the red button located on either side Figure 9 Hold down the white arrow button until the LCD keyboard drawer is located in the rack, as shown in Figure 9 Untitled-2 1.13 How to Install “One Man” Installation Slides 1.13.1. Package Contents 1 Mounting bracket x 2 pcs 2 Front mounting ear (left & right ) x 2 pcs 3 Support bracket x 4 pcs 4 M6 cage nut x 8 pcs 5 M6 washer x 8 pcs 6 M6*15mm screw x 8 pcs 7 M3.2*4.5mm screw x 14 pcs 1.13.2. Install the Front Mounting Ear x 2 pcs Disassemble the standard front mounting ears carefully Install the optional front mounting ears with M3.2*4.5mm screw x 8pcs Untitled-2 Untitled-2 Untitled-2 Untitled-2 Untitled-2 1.13.3. Install into Rack . Attach the mounting brackets to vertical mounting rails. . Leaving the screws slightly loose. . Attach left and right front mounting ears to vertical rails. . Tighten the screws. . Attach the support brackets to chasis with M3.2*4.5mm screws x 6 pcs . Installation complete. . Pickup the unit. . Insert inner members of slides into the already mounted internal slide members in the rack. Model No. NBK-01 1.14 Connect to Server via USB Interface Figure 15: Example of connecting CD-6 2-in-1 USB KVM cable to server via USB Interface 1.15 Connect to KVM via USB Interface Figure 16: Example of connecting CD-6 2-in-1 USB KVM cable to KVM via USB Interface The above connection is only for the LCD keyboard without KVM switch built-in. For the LCD keyboard drawer with KVM switch built-in, please refer to KVM switch manual. Section 2: Operations 2.1 On-screen Display Operation 17" & 19” LCD membrane Membrane Switch Function Power light Green = On Orange = Power saving Power on / off LCD Display the OSD menu Scrolls through menu options and adjusts the displayed control Exit the OSD screen Shortcut key to auto adjustment by pressing the button for 5 seconds or Toggle analog, digital & video connection (DVI-D and video options only) 2.2 On-screen Menu BRIGHTNESS / CONTRAST Brightness Adjust background black level of the screen image. Contrast Adjust the difference between the image background (black level) and the foreground (white level) AUTO ADJUST Auto Adjust Fine tunes the video signal to eliminate waviness and distortion. A “Adjusting” message is displayed during the process Auto Tune Optimize phase, clock, position and size. An “Adjusting” message is displayed during the process PHASE / CLOCK Phase / Clock To enter into the Phase & Clock sub menu H / V POSITION H / V Position Align the screen image left or right and up or down MISC Information Display the current resolution, refresh rate and frequency information on the screen OSD Timer Set the time duration in seconds that the OSD is visible after the last button is pressed. The factory default is 10 seconds Color Select the screen color – 5500K, 65000K & 9500K, The factory default is 9500K Language Select the language in which the OSD menu is displayed: English, Chinese (..), Japanese (...), German, French, Spanish, Italian. RESET Restore the settings to factory default 1 Image Brightness Adjust background black level of the screen image Contrast Adjust the difference between the image background (black level) and the foreground (white level) Sharpness Adjust the image from weak to sharp Saturation Adjust the saturation of the image color Hue Adjust the screen hue value 2 Geometry Auto Config Adjust automatically sizes, centers, and fine tunes the video signal to eliminate waviness and distortion. An “Adjusting” message is displayed during the process. H. Position Align the screen image left or right V. Position Align the screen image up or down Clock Adjust the clock value Phase Adjust the phase value 3 Function OSD Position Adjust OSD menu horizontal and vertical position OSD Zoom Adjust the difference between the image background (black level) and the foreground (white level). Color Temp Select the screen color – 5500K, 6500K & 9500K. The factory default is 6500K. 4 System Language Select the language in which the OSD menu is display. English, Chinese (..), Japanese (...), German, French, Spanish, Italian Time Function is not supported Power Off Function is not supported Reset Reset all settings to factory default. Section 3: Specifications Item Description Form Factor 1U rack mounting on slide-out rails LCD Manufacturer Diagonal Size 17" TFT 19” TFT Max. Resolution 1152 x 900 (Direct) 1280 x 1024 (Native) Brightness (cd/m.) 300 Color Support 16.2 Mil. Contrast Ratio (typ.) 700:1 1000:1 Viewing Angle (H/V) 150. x 135. Display Area (mm) 337 x 270 376 x 301 Tr Response Time (ms) 2 VGA Signal Input Analog RGB, 0.7Vp-p Sync. Type Separate H/V, Composite, SOG Resolution 640 x 350, 70 Hz 720 x 400, 70 Hz 640 x 480, 60/ 72/ 75 Hz 800 x 600, 60/ 70/ 72/ 75 Hz 1024 x 768, 60/ 70/ 72/ 75 Hz 1152 x 864, 60/ 70/ 75 Hz 1280 x 1024, 60/ 70/ 75 Hz Plug & Play DDC EDID 1.3 Console Port (Combo) 3-in-1 DB-15 connector for VGA / keyboard /mouse Support USB & PS/2 servers or KVM Switches Pow...
Otros modelos de este manual:Dispositivos de entrada - Rackmount Keyboard Drawer RSUN-N19 (2.08 mb)