Votos - 1, Puntuación media: 5
(
)
)
|
Resumen del manual
1,2 litre). •Fit the water reservoir back onto the power supply. 10 ISGA1580_IM 08/07/04 13:35 Side 11 Setting the temperature • Important! Set the iron (1) on the water reservoir (7), so that it stands on its soleplate. • Plug in and switch the current on. • Select the required iron temperature using the thermostat button (5): “•” Synthetic fabrics (nylon, polyester, acrylic, etc.) “••” Wool, silk or blends “•••” Cotton or linen • Do not start ironing before the thermostat light (6) goes out. The thermostat light switches on and off during the ironing, as the thermostat regulates the temperature of the iron. • If you turn the temperature up using the thermostat button, you should not start to iron until the thermostat light goes out. Steam ironing Steam ironing is only possible at high temperatures. Do not use steam ironing when the thermostat button is in position “•”. If you do, water runs out from the soleplate, because the iron is not hot enough to convert all water to steam. • Check that there is sufficient water in the reservoir. • Set the thermostat button in the required position (at least “••”). • Plug in. Start ironing when the thermostat light goes out. •Press one of the two arrow buttons on the control panel for steam selection (10) to select a steam setting. You can choose between the following settings: 1. Minimum continuous steam 2. Medium continuous steam 3. Maximum continuous steam • Hold the button for continuous steam (4) down. The iron gives off continuous steam from the soleplate (the power supply makes a brief buzzing sound). The indicator light (2) stays on as long as the function is active. Start steam ironing. • Release the continuous steam button to stop continuous steam. Steam shot This function provides extra steam when you want to remove marks or creases. This function cannot be used before the thermostat button goes off. • Hold the steam shot button (3) down. The iron gives off automatic steam shots from the soleplate at approximately 2-second intervals. • The indicator light (2) and the steam shot indicator on the control panel (10) stay lit as long as the button is held down and the function is active. Dry ironing Dry ironing can be performed in the same way as steam ironing, but do not press buttons 3 and 4. Limescale filter The water reservoir is equipped with a limescale filter (12), which reduces limescale in the reservoir and extends the life of the iron. Tips! • Always iron synthetic fabrics and silk on the reverse. This avoids shiny spots on the fabric. • The steam shot function can also be used when the iron is held upright. This is useful if you want to remove marks or creases from hanging garments, curtains, etc. •Wool products (100% wool) may be pressed when the iron is set to steam position. We recommend using the setting for maximum continuous steam, with a layer of dry fabric between the iron and the item to ironed. CLEANING • Remove the plug from the socket before cleaning. • Pour any excess water from the water reservoir. •Stand the iron upright, and allow it to cool completely. • Remove starch etc. from the soleplate using a damp cloth with a little cleaning agent. Wipe off with a dry cloth. • Never use a scouring sponge or abrasive cleaning agents on the soleplate. • Check regularly that the cord and plug are in good condition before the steam station is used. ENVIRONMENTAL TIPS Once any electrical product is no longer functional, it should be disposed of in such a way as to cause minimum environmental impact, in accordance with the regulations of your local authority. In most cases you can take such products to your local recycling station. GUARANTEE TERMS The guarantee does not apply: • if the above instructions are not followed • if the appliance has been interfered with • if the appliance has been mishandled, subjected to rough treatment, or has suffered any other form of damage • if faults have arisen as a result of faults in your electricity supply. TECHNICAL DATA Power: 2200 W (max.) Water reservoir volume: 1,2 l Colour: white Due to the constant development of our products in terms of function and design, we reserve the right to make changes to the product without prior warning. IMPORTER Adexi Group We cannot be held responsible for any printing errors 11 ISGA1580_IM 08/07/04 13:35 Side 12 DE EINLEITUNG Bevor Sie Ihren neue Bugelstation erstmals in Gebrauch nehmen, sollten Sie diese Anleitung sorgfaltig durchlesen. Bewahren Sie die Anleitung bitte auf, um sich jederzeit uber die Funktionen der Bugelstation informieren zu konnen. SICHERHEITSHINWEISE Normaler Gebrauch der Bugelstation • Der unsachgema.e Gebrauch der Bugelstation kann zu Verletzungen und zu Beschadigungen der Bugelstation fuhren. • Die Bugelstation darf nur zu dem ihr zugedachten Zweck eingesetzt werden. Der Hersteller ist nicht fur Schaden verantwortlich, die durch den unsachgema.en Gebrauch oder die unsachgema.e Handhabung der Bugelstation verursacht werden (siehe auch die Garantiebe...