Votos - 2, Puntuación media: 5 ( )

Fabricar: Philips Tamaño del archivo: 706.95 kb Nombre del archivo: gc1703_01_dfu_fra.pdf Idioma del manual:

3 4 Put the mains plug in an earthed wall socket. Let the iron heat up until the temperature light first goes out and then goes on again (Fig. 5). Note:The temperature light goes on from time to time during ironing. Using the appliance Note:The iron may give off some smoke when you use it for the first time.This stops after a short while. Steam ironing 1 2 3 Make sure that there is enough water in the water tank. Set the recommended ironing temperature (see chapter ‘Preparing for use’, section ‘Setting the temperature’). After the temperature light has gone out, set the steam control to the appropriate steam position. Make sure that the steam setting you select is suitable for the ironing temperature selected: (Fig. 6) l for moderate steam (temperature settings 2 to 3) ; for maximum steam (temperature settings 3 to MAX) The iron starts to produce steam as soon as , it reaches the set temperature. Ironing without steam 1 2 Set the steam control to position O (= no steam). Set the recommended ironing temperature (see chapter ‘Preparing for use’, section ‘Setting the temperature’). Features Spray function (specific types only) You can use the spray function to remove stubborn creases at any temperature. 1 Make sure that there is enough water in the water tank. 2 Press the spray button several times to moisten the article to be ironed (Fig. 7). Steam boost (specific types only) A powerful shot of steam helps to remove stubborn creases. The steam boost function can only be used at temperature settings between 3 and MAX. 1 Press and release the steam boost button (Fig. 8). Wait a while before you use the button again to avoid spluttering. Never direct the steam at people. Vertical steam boost (specific types only) You can also use the steam boost function when you hold the iron in vertical position.This is useful for removing creases from hanging clothes, curtains etc. 1 Hold the iron in vertical position.Then press and release the steam boost button (Fig. 9) Never direct the steam at people. Automatic shut-off (specific types only) The automatic shut-off function automatically switches off the heating element if the iron has not been moved for a while. The auto-off light starts flashing to indicate that the , iron has been switched off by the safety shut-off function (Fig. 10). -In horizontal position, this happens after 30 seconds. -In vertical position, this happens after 8 minutes. 1 To let the iron heat up again, pick it up or move it slightly. -If the temperature light goes on, wait for it to go out before you start ironing. -If the temperature light does not go on, the iron is ready for use. Cleaning and maintenance After ironing 1 2 3 Put the iron on its heel. Remove the mains plug from the wall socket and let the iron cool down. Wipe scale and any other deposits off the soleplate with a damp cloth and a non-abrasive (liquid) cleaner. To keep the soleplate smooth, avoid hard contact with metal objects. Never use a scouring pad, vinegar or other...

Descargar ahora

Introduzca dos números de la imagen: