Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
Read all instructions carefully. 2. Use iron only for its intended use. 3. To protect against risk of electrical shock, do not immerse the iron in water or other liquids. 4. Never yank cord to disconnect fromoutlet. Grasp plug and pull to disconnect. 5. Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. 6. Always disconnect iron from electricaloutlet when filling with water, emptying, or when not in use. 7. Do not operate iron with a damaged cord, or after the iron has been dropped or damaged in any manner. To avoid therisk of electric shock, do not disassemble the iron. Return the iron to Euro-Pro Operating LLC for examination and repair. Incorrect reassembly can causethe risk of electric shock when the iron is used. 8. Close supervision is necessary for anyappliance being used by or nearchildren. Do not leave iron unattended while connected or on an ironing board. 9. Burns can occur from touching hot metal parts, hot water or steam. Use cautionwhen you turn a steam iron upsidedown; there may be hot water in the reservoir. 10. Never use or rest iron on an unstable surface. 11. While the iron is hot, never set iron on an unprotected surface - even if it is on its heel rest. 12. CAUTION: TO PREVENT ELECTRIC SHOCK OR OTHER INJURY, before filling the iron with water, make sure thatthe plug is removed from the outlet. POLARIZED PLUG: This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature. SAVE THESE For Household 13. WARNING: Never fill the iron with fabric conditioner, starches or anyother solution, as these will damagethe steam mechanism. Do not use contaminated water. 14. CAUTION: TO AVOID FIRE, never leave iron unattended while it is plugged in. 15. CAUTION: TO PREVENT ELECTRIC SHOCK, never use the iron in a location where it can fall or be pulled into water or another liquid. If the iron falls intowater or other liquid, unplug itimmediately. DO NOT reach into the water or liquid. 16. WARNING: Never use scouring pads, abrasive or chemical cleaners, or solvents to clean the exterior or soleplate of your iron. Doing so will scratch and/or damage the surface. 17. CAUTION: DO NOT aim iron at face, towards yourself, or anyone else whileusing or adjusting steam. Burns orserious injury may occur. 18. Always store your iron standing upright, not on the soleplate. If stored face down, even the smallest amount of moisture will cause the soleplate tocorrode and stain. 19. This appliance is for household useonly. SPECIAL INSTRUCTIONS 1. To avoid a circuit overload, do not operate another high-wattage appliance on the same circuit. 2. If an extension cord is absolutelynecessary, use a 15-ampere cord. Cords rated for less amperage may overheat. Use care to arrange the cord so that itcannot be pulled or tripped over. Lightweight Iron, remove any labels, stickers or tags that may be attached to the body or soleplate of the iron. When turned on for the first time, your new iron may emit an odor for up to 10 minutes. This is due to the initial heating of the materials used in making the iron. 1. Electronic Temperature Control 2. Display Panel 3. Atomizer Spray Button 4. Burst of Steam Button 5. Variable Steam Control 6. Water Inlet Door 7. Spray Nozzle Technical Specifications Voltage: 120V, 60 Hz Power: 1500 Watts Illustrations may differ from actual product after initial heating. Also, before ironing with steam for the first time, allow iron to heat, hold in a horizontal position and hit the burst of steam button several times. The iron may emit some small particles from the steam holes. This is normal and will clear after pressing the burst of steam button several times. Display Panel 14 11 8. Water Level Window 9. Stainless Steel Soleplate 10. Handle 11. Auto-Shut-Off 12. Power On Light 13. Fabric Settings 14. Temperature & Steam Indicators 15. Water Flask 1 Rev. 08/07C 2 FEATURES OF SHARK ELECTRONIC IRON OPERATING INSTRUCTIONS 3 1 2 1. BURST OF STEAM BUTTON Burst of steam provides extra, sudden bursts of steam which aid in removing stubborn wrinkles from fabrics such as denim, cotton or linen. 2. ATOMIZER SPRAY BUTTON Pressing this button provides a defined jet of spray which gently moistens fabric. 3. VARIABLE STEAM CONTROL Minimum to maximum steaming for different materials. Self cleaning feature flushes internal sole plate with water. 4. ANTI-DRIP FUNCTION Cuts off water when the iron temperature is too low. 5. BUILT-IN ANTI-CALCIUM FILTER Prevents calcium build- up and prolongs the life of the iron. 6. STAINLESS STEEL SOLEPLATE Provides maximum glide- ability and heat retention. LED Display Panel 7. LED DISPLAY PANEL Displays the fabric setting (left) and the temperature indicators (right). 8. WATER FILLING INLET The co...