Votos - 0, Puntuación media: 0 ( )

Fabricar: Philips Tamaño del archivo: 1.41 mb Nombre del archivo: Idioma del manual:

4 Put the mains plug in a wall socket and set the on/off switch to on (GC7420) or press the on/off button (GC7430) (Fig. 6). Note:When you switch on the appliance, the steam tank produces a pumping sound.This sound is normal and indicates that water is being pumped into the steam tank. The power-on light on the steam tank and the iron temperature light go on to indicate that , the steam tank and the iron start to heat up. GC7430:The high steam setting light flashes to indicate that the steam tank is heating up. , After approx. 2 minutes, the steam setting light stays on continuously, to indicate that the , water in the steam tank is hot enough for steam ironing. 5 GC7430: Press the steam setting selector to set a steam setting suitable for the selected ironing temperature: (Fig. 7) -Select the ECO setting for optimum ironing performance at temperature settings 2 to MAX. -Select the high steam setting for temperature settings 3 to MAX. Note: During ironing, the temperature light goes on from time to time.This indicates that the iron is heating up to the set temperature. 6 Keep the steam activator pressed in while you steam iron. (Fig. 8) -If you want to use the steam function continuously, slide the steam lock to the locking position. To stop steaming, release the steam lock (Fig. 9). -Release the steam lock when you put the iron on its heel.This makes the water in the water tank last longer. ironing without steam (GC7430 only) Do not press the steam activator while you iron. 1 2 Set the required ironing temperature (see chapter ‘Preparing for use’, section ‘Setting the temperature’). (Fig. 5) Put the mains plug in a wall socket and press the on/off button (Fig. 10). The soleplate starts to heat up. ,3 Press the steam selector and select ‘no steam’. (Fig. 7) The ‘no-steam’ light goes on. ,4 Iron without pressing the steam activator. If the steam tank is empty or has not heated up yet, you hear a clicking sound inside the tank. , This sound is caused by the opening of the steam valve and is perfectly harmless. EnGlish after ironing 1 2 3 Switch off the appliance. Remove the mains plug from the wall socket. Put the iron on the iron platform and let the appliance cool down before you start to clean it. Features vertical steam ironing Never direct the steam at people. 1 2 To steam iron hanging curtains and clothes (jackets, suits, coats), hold the iron in vertical position (Fig. 11). Press the steam activator. steam boost function (GC7430 only) Never direct the steam at people. During steam ironing, you can use the steam boost function to remove stubborn creases. 1 2 Set the temperature dial to a position between 3 and MAX. Press the steam boost button (Fig. 12). Note: Some water droplets may appear when you use the steam boost function for the first time.The water droplets disappear after you have used the steam boost function for some time. ‘Water tank empty’ light (GC7430 only) -When the water in the water tank runs low during use, the ‘water tank empty’ light goes on (Fig. 13). 1 Refill the water tank (see chapter ‘Preparing for use’). Cleaning and maintenance Never immerse the iron and the steam tank in water or any other liquid, nor rinse them under the tap. Let the iron and the steam tank cool down sufficiently before you clean them. 1 2 Clean the iron and the steam tank with a damp cloth. Wipe scale and any other deposits off the soleplate with a damp cloth and a non-abrasive (liquid) cleaner. rinsing the steam tank Let the appliance cool down sufficiently before you remove the Calc-Clean rinsing cap. Rinse the steam tank once a month or after you have refilled the water tank 10 times. Empty the water tank by pouring the water into the sink (Fig. 14). Turn the cord storage hook anticlockwise (1) and remove it (...

Descargar ahora

Introduzca dos números de la imagen: