Votos - 0, Puntuación media: 0 ( )

Fabricar: Philips Tamaño del archivo: 1.27 mb Nombre del archivo: Idioma del manual:

If there is no Customer Care Centre in your countr y, turn to your local Philips dealer or contact the Ser vice Depar tment of Philips Domestic Appliances and Personal Care BV. 14 ENGLISH Troubleshooting This chapter summarises the most common problems you could encounter with your iron. Please read the different sections for more details. If you are unable to solve the problem, please contact the Philips Customer Care Centre in your countr y. SolutionPossible cause(s) Problem The iron is plugged in but the soleplate is cold. Connection problem Check the mains cord, the plug and the wall socket. Temperature dial set at MIN Set the temperature dial to the required position. No steam Not enough water in the water tank. Fill the water tank (see 'Preparing for use'; section 'Filling the water tank'.) The steam control has been set to position O. Set the steam position to A, E or E (see 'Using the appliance', section 'Steam ironing'). The soleplate is not hot enough and/or the drip stop function (specific types only) has been activated. Set the temperature dial to a position in the steam area (2 to MAX). Put the iron on its heel and wait until the temperature light has gone out before you star t ironing. No shot of steam or no Ver tical Shot of Steam (specific types only). The (Ver tical) Shot of Steam function has been used too often within a ver y shor t period. Put the iron in horizontal position and wait a while before using the (Ver tical) Shot of Steam function again. The soleplate is not hot enough. Set the temperature dial to a position in the steam area (2 to MAX). Put the iron on its heel and wait until the temperature light has gone out before you star t ironing. Flakes and impurities come out of the soleplate during ironing. Hard water forms flakes inside the soleplate. Use the Calc-Clean function a few times (see 'Cleaning and maintenance', section 'Calc-Clean'). Red light is blinking (GC2225 and GC2130 only). The automatic shut-off function has been activated (see 'Other features', section 'Automatic shut-off'). Pick the iron up or move it slightly to deactivate the automatic shut-off function: the red light will stop blinking. Water droplets on fabric (GC2225/2220/2215/GC2130/2126/2 125/2120 only) The filling cap has not been closed properly. Press the filling cap until you hear a click. Water droplets on fabric (GC2215/2120/2115/2110/2105 only) The temperature has been set too low. Set the temperature dial to a position in the steam area (2 to MAX). Put the iron on its heel and wait until the temperature light has gone out before you star t ironing. Water drips from the soleplate after the iron has cooled down or has been stored. The iron has been put in horizontal position while there was still water in the water tank. Empty the water tank and set the steam control to position O after use. Store the iron on its heel. Keterangan umum (gbr. 1) Penting INDONESIA 15 A Nozel semprot B Tutup lubang pengisian (hanya GC2225/2220/2215/GC2130/2...

Descargar ahora

Introduzca dos números de la imagen: