Votos - 0, Puntuación media: 0 ( )

Fabricar: Philips Tamaño del archivo: 792.1 kb Nombre del archivo: Idioma del manual:

2). Preparing for use Filling the water tank Do not put perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the water tank. 1 2 3 Make sure the appliance is unplugged. Set the steam control to position 0 (= no steam) (Fig. 3). Open the cap of the filling opening. EnGliSh 9 4 Use the filling cup to fill the water tank with tap water up to the maximum level.Tilt the iron backwards to check if the water level has reached the MAX indication (Fig. 4). Do not fill the water tank beyond the MAX indication. 5 Close the cap of the filling opening (‘click’). Setting the temperature Temperature and steam settings MAX Yes ; 3 ; 2 N.A. l 1 0 setting settingFabric type Temperature Steam Steam boost Yes N.A. 1 0 N.A. Check the laundr y care label for the required ironing temperature. If you do not know what kind or kinds of fabric an ar ticle is made of, determine the right ironing temperature by ironing a par t that is not visible when you wear or use the ar ticle. Silk, woolen and synthetic materials: iron the reverse side of the fabric to prevent shiny patches.To prevent stains, do not use the spray function. Star t ironing the ar ticles that require the lowest ironing temperature, such as those made of synthetic fibers. 1 2 Put the iron on its heel. To set the required ironing temperature, turn the temperature dial to the appropriate position (Fig. 5). See table ‘Temperature and steam settings’. Linen Cotton Wool Silk Synthetic fabrics (e.g. acr ylic, nylon, polyamide, polyester) 10 EnGliSh 3 4, Put the mains plug in an earthed wall socket. The temperature light goes on (Fig. 6). When the temperature light goes out, wait a while before you start ironing. Note:The temperature light goes on from time to time during ironing. using the appliance Note:The iron may give off some smoke when you use it for the first time. This stops after a short while. Sensor-controlled handle with energy-saving technology -While you iron, the sensor in the handle ensures that the iron produces the optimal amount of steam. As 90% of the energy consumption of an iron is used to create steam, energy consumption is optimised by optimising the steam output. When you intuitively put more force on the handle to remove stubborn creases, the iron automatically produces more steam. -When you do not press the handle, when you lift the iron and when the iron is standing on its heel or on its soleplate without any movement, the automatic energy-saving technology limits the steam output to reduce energy consumption (Fig. 7). Steam ironing 1 2 3 Make sure that there is enough water in the water tank. Set the recommended ironing temperature (see chapter ‘Preparingfor use’, table ‘Temperature and steam settings’). Set the appropriate steam setting. Make sure that the steam setting is suitable for the set ironing temperature (see chapter ‘Preparing for use’, table ‘Temperature and steam settings’) (Fig. 8). Note:The iron is ready for steam ironing as soon as it has reach...

Descargar ahora

Introduzca dos números de la imagen: