Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Set the temperature control within the steam area (between the “••” and “max”) or turn the steam regulator (A) to You have pressed the shot of steam button (C) repeatedly without waiting for 5 seconds between each press Wait 5 seconds between each press of the jet of steam button Water has been left in the tank (I) when the soleplate was cold, with the steam regulator (A) set at position different to Always empty the tank after ironing and set the steam regulator to after ironing and when filling the tank Water is dripping from the holes in the soleplate Tap or part distilled water has not been used (see “Filling the water tank” section) or other products such as fragrant water have been added to the tank Mix distilled water with tap water as directed in the “Filling the water tank” section and never add any other products to the water tank Deposits come out through the holes in the soleplate Traces of lime scale are coming out of the steam chamber Carry out a cleaning cycle (see “Multiple de-scaling system” section) Flashing lamp on top of handle (*) Auto-shut off has been activated. Move the iron gently fromside to side to re-start it. The lamp will then flash once before it re-heats TDA46.. sensixx B3 Customer Service Great Britain Bosch Customer Service Grand Union House Old Wolverton Road Milton Keynes MK12 5PT UK +44 (0)844 892 8923 IRL +353 (0)1450 2655 Operating instructions (*) Model dependent You can download this manual from the local homepages of Bosch 003 TDA46..GB/03/10 Thank you for buying the TDA46 steam iron from Bosch. This iron has a lightweight design and is built to perform. These instructions contain valuable information about the unique features of this iron and some hints to make ironing easier for you. Please visit for more product information or to register your product, just follow the link to the Online guarantee registration. Before using the iron for the first time Please carry out the following steps: 1. Remove the protective cover from the soleplate before using the iron. 2. While the iron is unplugged, fill the water tank (I) with tap water 3. Plug the appliance into the mains and set the temperature control (J) to the maximum position by lining it up with the pointer (H) on the iron. 4. When the iron has reached the correct temperature, the pilot lamp (L) goes out. Set the steam regulator (A) to the maximum position. 5. Hold the iron horizontally and repeatedly press the shot of steam button (C). Any dirt should come out of the soleplate (F). It may smoke and smell – this is normal and will cease after a short while. 6. If necessary, carefully clean the soleplate down with a dry, folded cloth Cleaning and Maintenance Attention ! Risk of burns ! For general cleaning, follow the information below: Problem Solution Dirty/lightly marked iron body or soleplate Clean body of iron or soleplate with a damp cloth then dry it. Mark develops on soleplate during use Set the iron to i...
Otros modelos de este manual:Planchas - TDA4622GB/02 (909.9 kb)
Planchas - TDA4625GB/01 (909.9 kb)
Planchas - TDA4625GB/02 (909.9 kb)
Planchas - TDA4632GB/01 (909.9 kb)