Fabricar: Bosch
Tamaño del archivo: 719.57 kb
Nombre del archivo:








![]() |
Otros manuales para este modelo:
Resumen del manual
Su plancha ha sido disenada para usar agua de grifo. Para que la funcion de la salida del vapor funcione de forma optima durante mas tiempo, mezcle agua de red con agua destilada en proporcion 1:1. Si el agua de su zona en muy dura, mezcle agua de red con agua destilada en proporcion 1:2. Nunca sobrepase la marca de llenado maximo “max”. • This appliance is to be connected and used in accordance with the information stated on its characteristics plate. • This appliance must be connected to an earthed socket. If it is absolutely necessary to use an extension cable, make sure that it is suitable for 16A and has a socket with an earth connection. • If the safety fuse fitted in the appliance blows, the appliance will be rendered inoperative. To restore normal operation the appliance will have to be taken to an authorised Technical Service Centre. • In order to avoid that, under unfavourable mains conditions, phenomena like transient voltage drops or lighting fluctuations can happen, it is recommended that the iron is connected to a power supply system with a maximum impedance of 0.27. . If necessary, the user can ask the public power supply company for the system impedance at the interface point. • The appliance must never be placed directly under the tap to fill the water tank. • Unplug the appliance from the mains supply after each use, or if a fault is suspected. • The electrical plug must not be removed from the socket by pulling the cable. • Never immerse the iron in water or any other fluid. • Do not leave the appliance exposed to weather conditions (rain, sun, frost, etc.) Before using the iron for the first time With the iron unplugged, fill in the tank of the iron with tap water and set the temperature control dial to “max” Plug in the appliance to the mains. When the steam iron has reached the desired temperature (pilot light switches off), start steaming by setting the steam regulator to the maximum steam setting and by repeatedly pressing the button . When using the steam function for the first time, do not apply it on the laundry, as there could still be dirt in the steam dispenser. When turned on for the first time, your new iron may smell and emit a little smoke and a few particles; this will stop after a few minutes. General safety warnings • The iron must not be left unattended while it is connected to the supply mains. • Remove the plug from the socket before filling the appliance with water or before pouring out the remaining water after use. • The appliance must be used and placed on a stable surface. • When placed on its stand, make sure that the surface on which the stand is placed is stable. • The iron should not be used if it has been dropped, if there are visible signs of damage or if it is leaking water. It must be checked by an authorized Technical Service Centre before it can be used again. • With the aim of avoiding dangerous situations, any work or repair that the appliance may need, e.g. replacing a faulty mains cable, ...
Otros modelos de este manual:Planchas - TDA46MOVE1/01 (719.57 kb)
Planchas - TDA46MOVE2/01 (719.57 kb)
Planchas - TDA46MOVE3/01 (719.57 kb)