Votos - , Puntuación media:
(
)
)
Fabricar: Crane
Tamaño del archivo: 615.39 kb
Nombre del archivo: crane_personal_ultrasonic_cool_mist_humidifier_manual.pdf
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Resumen del manual
The support battery is protected by a plastic strip. The plastic strip must be removed to activate the batteries. • The battery compartment for the support batteries is located at the bottom base of the humidifiers. TO REPLACE SUPPORT BATTERIES NOTE: Replacement LR1130/1.5V batteries can be purchased at any local drugstore. 1. Press the battery compartment tab and lift the compartment lid. Remove the three LR1130/1.5V batteries 2. Insert three LR1130/1.5V batteries into the battery compartment. Please observe the correct +/- battery polarity. The + polarity must point upwards. 3. Properly replace the battery compartment lid. HOW TO SET CLOCK As soon as the humidifier is connected to the power source the LCD display on the clock will illuminate blue. 1. Press the button FLOW/ SET and hold until the first two numbers will blink. 2. Press the FUNCTION button to adjust the correct hour. 3. Press the FLOW/SET button again and the last two numbers will blink. 4. Press the FUNCTION button to adjust the correct minutes. 5. Press the FLOW/SET several times until the correct clock time appears on display. NOTE: You will need to press through other functions until the clock time you set appears. HOW TO OPERATE THE HUMIDIFIER FEATURES AUTO OFF SAFETY FEATURE As soon as the water in the water tank runs low the humidifier will automatically switch OFF. The set LCD Clock will remain on. Setting HIZLO Output 1. As soon as the humidifier is switched ON it will operate on the HI output. 5 bars will on the right hand side of the display. 2. Press the FLOW/ SET to reduce output. The bars will disappear on right side of the display. 3. The output will be reduced and less mist will be emitted into the air. 4. To increase the output press the FLOW button again. 6 Operate LED Niahtliaht Press the FUNCTION button to activate the LED nightlight ON/OFF. NOTE: The LED nightlight will also work when the mist is switched OFF. HOW TO OPERATE CYCLE FUNCTION The cycle function allows you to set the humidifier to cycle ON and OFF. For Example: The humidifier is set to switch ON for one hour. After one hour the humidifier will switch OFF for three hours and then will switch ON again for one hour. The cycle will go on and off until the water in the water tank runs low and the humidifier safety feature turns off humidifier automatically. The humidifier will cycle a maximum of 12 hours. How to Set Cycle Function 1. Press and hold the FLOW/ SET button until the first two numbers blink. 2. In case the clock was not set (see Setting Clock) please set clock now before continuing with cycle function. 3. If clock was set press FLOW button until the double arrow appear in the LCD display. At this point the first two numbers will blink. 4. Press the FUNCTION button to set the cycle ON hour. 5. Press the FLOW/ SET button and the minutes will blink. 6. Press the FUNCTION button to set the cycle ON minutes. 7. Press the FLOW/ SET button to get into the cycle OFF setting mode. Set the time the same as the cycle ON. NOTE: You are setting the number of hours that you want the humidifier to cycle on and off. 8. Press the FUNCTION button to set the cycle OFF hour. 9. Press the FLOW/SET button and the minutes will blink. 10. Press the FUNCTION button to set the cycle OFF minutes. 11. Press the FLOW/SET button to get back to the normal LCD clock display. How to Activate the Cycle ON/OFF 1. Press and hold for two seconds the FUNCTION button until the double arrow appears. 2. After two seconds the cycle function will start. The humidifier will switch ON and OFF at the pre-set time. To switch the humidifier OFF during the cycle ON/OFF period press and hold the CANCEL button until the humidifier switches OFF. NOTE: If the double arrows (cycle symbol) blink several times the times was not set correctly. Please repeat the Cycle ON/OFF procedure. How to Shut Cycle OFF Press and hold CANCEL button. 7 HOW TO OPERATE THE AUTO ON/OFF FUNCTION The humidifier can be switched ON/OFF by a timer function. To set the timer function the humidifier must be in the OFF mode. How to Set Auto ON/OFF 1. Press and hold FLOW/ SET button until the first two number blink in the display. 2. In case the clock was not set (see How to Set Clock) please set clock now before continuing with timer. 3. If clock was set, press FLOW button several times (pressing through other functions) until the word Auto appears in the LCD display. At this point the first two numbers will blink. 4. Press the FUNCTION button to set the auto ON hour. 5. Press the FLOW/SET button and the minutes will blink. Press the FUNCTION button to set the auto ON minutes. 6. Press the FLOW/SET button to get into the auto OFF setting mode. Set the time the same as the auto ON. 7. PRESS the FLOW/ SET button and the minutes will appear. How to Activate the Auto ON/OFF 1. Press and hold for two seconds the FUNCTION button until the double arrow appears. 2. Press again the FU...