Votos - 3, Puntuación media: 3
(
)
)
|
Resumen del manual
WHEN USING ANY ELECTRICAL APPLIANCE, BASIC SAFETY PRECAUTIONS SHOULD BE FOLLOWED INCLUDING: 1. Always place the humidifier on a firm, flat and level surface. It may not work properly on an uneven surface. 2. Place the humidifier in an area where it is not accessible to children. 3. Do not place the humidifier near any heat sources such as stoves, radiators and heaters. 4. Before using the humidifier, check the power cord for any signs of damage. If the cord is found to be damaged, DO NOT USE and return the humidifier to Duracraft under the warranty agreement for repair. 5. This product is equipped with a polarized AC-line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. NEVER connect the humidifier to any power source other than a 120V AC polarized outlet. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact an electrician to replace the obsolete outlet. DO NOT defeat the safety purpose of the polarized plug. 6. The humidifier should always be unplugged and emptied when not in operation or while being serviced or cleaned. 7. Never tilt or attempt to move the humidifier while it is operating or filled with water. UNPLUG the humidifier before moving. 8. This humidifier requires regular cleaning. Refer to the CLEANING instructions provided. Never clean the humidifier in any manner other than as instructed in this manual. 9. Turn the humidifier OFF if the relative humidity exceeds 60%, or if you notice moisture on the inside of your windows. For proper humidity readings use an hygrometer which is available in many hardware and department stores, or by ordering one from Duracraft (see Replacement Parts and Care Products). This humidifier was designed to produce an output of 4 gallons (15.1 litres) over a period of 24 hours; it will cover an area of 1,765 sq. ft. (164 m2 ) — a room or area approximately 35' x 50' (10.7m x 15.2m)*. *Area covered and running time depend on quality of construction and insulation. INTRODUCTION INTRODUCTION Thank you for purchasing the DURACRAFT® MODEL DH-831 Natural Cool Moisture™ HUMIDIFIER with removable water tank. Before using your humidifier, we would like to explain the benefits of maintaining your home or office at the proper humidity level. HEALTH Your body needs moisture to stay healthy and comfortable. Dry air can be damaging and irritating. The Duracraft® Natural Cool Moisture™ Humidifier can help relieve: • Dry, itchy skin and chapped lips. • Cold symptoms and congestion. • Dry, scratchy throat and coughs. For serious medical conditions, always consult your physician prior to use. ENVIRONMENT Maintaining the proper moisture level in your home or office with your Duracraft® Natural Moisture™ Humidifier will also: • Replace needed moisture in furniture. • Keep indoor plants moist and healthy. • Eliminate cracking and dryness in wood furniture and fixtures. • Minimize static electricity. HOW DOES IT WORK? Dry air is pulled through the Natural Cool Moisture™ system and a quiet fan disperses invisible, moisture-balanced air. Unwanted minerals and bacteria from the water are trapped inside the Natural Cool Moisture™ filter. There is no “mist” or excessive condensation emitted. Duracraft's® exclusive Automatic Moisture Balance System™ increases moisture output when the air is dry and lowers the moisture output when the humidity level is high. This automatically adjusts the output for maximum comfort and helps prevent condensation. SET UP • Select a firm, level, flat location — at least six inches (15 cm) from any wall for proper air flow and convenient to an electrical outlet. • Place the humidifier on a water-resistant surface, as water can damage furniture and some flooring. Duracraft® will not accept responsibility for property damage caused by water spillage. FILL ING We recommend that the humidifier be disinfected prior to first use. Please see CLEANING instructions. • Remove the Water Tank by grasping handle and pulling straight up. Set aside (Fig. 1). . FIG. 1 • Remove the Upper Motor Housing from the Reservoir Base, being careful not to let the power cord drop into the base (Fig. 2). HIGH NORMAL OFF POWER HIGH DESIRED HUMIDITY LOW HUMIDITY LEVEL MOISTURE OUTPUT . FIG. 2 • Remove the Natural Cool Moisture™ filter from its frame in the Reservoir Base (Fig. 3). Run it under cold water; this will help reduce residue build-up. Turn the filter upside down before repositioning it in its frame. Replace in the humidifier. To help extend the life of your filter, repeat this step every time you fill your humidifier. .FIG. 3 • Turn the Water Tank upside-down so that the fill cap is facing up; unscrew the fill cap by turning it counter-clockwise. • Fill the tank with COOL tap water (Fig. 4). Distilled water is not necessary as the water is filtered by the Natural Cool Moisture™ filter. DO NOT USE HOT WATER. ..........