Votos - 1, Puntuación media: 4 ( )

Fabricar: Crane Tamaño del archivo: 885.62 kb Nombre del archivo: Idioma del manual:

Use cool tap water. DO NOT add any medication or other additives to the water. DO NOT pour water into Mist Outlet Channel. 4. Replace the Water Tank Cap by aligning the threads on the Water Tank with the threads on the Cap and turning it clockwise. 5. Turn the Water Tank over and place the full Water Tank on the Central Body, making sure it fits perfectly. Place the Water Tank Cap with Mist Output Slots on top of the Water Tank. Note: Do not attempt to move the humidifier while Water Tank is placed on the Water Basin. Doing so may cause leakage of water. Also do not place humidifier on the floor. Place humidifier on an elevated, non-metallic, lint-free, waterproof, level surface for best performance. 6. Plug the Power Cord into a wall socket and turn on the unit by using the Control Knob. 7. The indicator light will turn to red. In a few seconds it will switch to green, indicating that there is enough water in the Water Basin. Mist will begin emitting through the Mist Output Slots. 6 8. Use the Control Knob to adjust the intensity of the mist output. Turning the knob clockwise will increase the moisture output. Turning the knob counterclockwise will reduce the moisture output. Note: When set at the maximum level, it is normal to hear a faint dripping sound. 9. When the humidifier runs out of water, the indicator light will turn red and the mist output will stop. This is a safety feature to prevent the humidifier from possibly overheating and damaging the Nebulizer. This safety feature uses a Water Level Sensor to stop the Nebulizer once the water level sinks below the required level in the Water Basin. Turn the humidifier off and unplug the unit before removing and refilling the Water Tank. Please note that the indicator light on the humidifier water basin will stay on. The (red) light indicates that the humidifier is turned on and needs to be refilled. INSERTING OPTIONAL HUMIDIFIER FILTER (Filters are not included with the humidifier and can be purchased separately from Crane USA.) A humidifier filter is an optional accessory for your Crane Cool Mist Humidifier. Filters are used to reduce white dust caused by hard water. Soak humidifier filter in water for 30 minutes to activate performance. Place humidifier filter inside Water Tank. NOTE: Do not leave the filter inside humidifier longer than the recommended time. (See filter instructions on filter box packaging.) SET THE CORRECT HUMIDITY OUTPUT Always place the humidifier on an elevated, non-metallic, lint-free, waterproof, level surface for best performance. Adjust the Control Knob so that the mist rises up to be absorbed by the room air. Do not set Control Knob too high as the mist cannot be absorbed by the air and may accumulate on the surfaces around the humidifier. If the humidifier is placed near a fan or air conditioning outlet the mist may be forced down by the foreign air stream. Change the location of the humidifier or reduce the output of the other room conditionin...

Descargar ahora

Introduzca dos números de la imagen: