Votos - 4, Puntuación media: 4.3
(
)
)
|
Resumen del manual
If this happens, the tap must be replaced. ! This procedure must be performed by a qualified technician authorised by the manufacturer. The removable parts of the burners should be washed frequently with warm water and soap and any burnt-on substances removed. • For hobs which ligth automatically, the terminal part of the electronic instant lighting devices should be cleaned frequently and the gas outlet holes should be checked for blockages. • The electric hotplates should be cleaned with a damp cloth and lubricated with a little oil while still warm. • Stainless steel can be marked by hard water that has been left on the surface for a long time, or by aggressive detergents containing phosphorus. After cleaning, rinse and dry any remaining drops of water. 10 Troubleshooting It may happen that the appliance does not function properly or at all. Before calling the service centre for assistance, check if anything can be done. First, check to see that there are no interruptions in the gas and electrical supplies, and, in particular, that the gas valves for the mains are open. Problem Possible causes/Solution The burner does not light or the flame is not even around the burner. The gas holes on the burner are clogged. All the movable parts that make up the burner are mounted correctly. There are draughts near the appliance. The flame dies in models with a safety device. You pressed the knob all the way in. You keep the knob pressed in long enough to activate the safety device. The gas holes are not blocked in the area corresponding to the safety device. The burner does not remain lit when set to minimum. The gas holes are not blocked. There are no draughts near the appliance. The minimum setting has been adjusted properly. The cookware is unstable. The bottom of the cookware is perfectly flat. The cookware is positioned correctly at the centre of the burner. The pan support grids have been positioned correctly. If, despite all these checks, the hob does not function properly and the problem persists, call the nearest Customer Service Centre. Please have the following information handy: • The appliance model (Mod.). • The serial number (S/N). This information can be found on the data plate located on the appliance and/or on the packaging. ! Never use unauthorised technicians and never accept replacement parts which are not original. 11 Руководство по эксплуатации ВАРОЧНАЯ ПАНЕЛЬ Содержание GB English, 1 Русскии,12 CISPH640 М /НА CISPH640 М IX /НА CISPH640 MS /НА CISPH640 MS IX /НА CISPH640 MST /НА CISPH640 MST IX /НА 7HPH 640 RU/НА 7HPH 640 GH RU/НА 7HPH 640S RU/НА 7HPH 640 ST /НА 7HPH 640 ST GH RU/НА 7HPHR 640 ST /НА 7HPH 631 MS IX RU/HA 7HPH 631 MS RU/HA Монтаж, 13-16 Расположение Электрическое подключение Подсоединение к газопроводу Паспортная табличка Характеристики конфорок и форсунок Описание изделия, 17 Общии вид Включение и эксплуатация, 18 Практические советы по эксплуатации газовых конфорок Практич...
Otros modelos de este manual:Placas - 7HPH 631 MS IX RU/HA (1.14 mb)
Placas - CISPH640 M /HA (1.14 mb)
Placas - CISPH640 M IX /HA (1.14 mb)
Placas - CISPH640 MS /HA (1.14 mb)