Votos - 2, Puntuación media: 4.5 ( )

Fabricar: Cannon Tamaño del archivo: 692.67 kb Nombre del archivo: Idioma del manual:

Hotplates are slow to boil or will not simmer Check that your pans conform to the recommendations in these instructions. Marks appearing on hotplates. Can not clean hob / hotplates. The hob surround can be cleaned with warm soapy water and a cream cleaner, such as Cif. The sealed hotplates should be cleaned regularly, (please refer to the Care and Cleaning section for further information. Please note that replacement hob cleaning kits are available from our parts department, see Key Contacts, back page. Grill not working. The grill door MUST be open. Grill keeps turning on and off. When the grill control is operated at a setting less than maximum, this is normal regulator operation, not a fault. Condensation on the wall at the rear of the cooker. Steam and/or condensation may appear from the vent at the rear of the appliance when using an oven particularly for foods with a high water content e.g. frozen chips, roast chicken etc. This is normal and any excess should be wiped off. Steam / Condensation in the oven after use. Steam is a by-product of cooking any food with a high water content. To help minimise always: a) Try to avoid leaving food in the oven to cool after being cooked. b) Use a covered container, wherever possible Electronic timer (only for C50EK...) The electronic timer displays the time and the timer function with countdown. To set the clock To set the timer To cancel a previous setting Note: This may be set while the oven is switched off or while it is switched on. 1. Press the button several times until the icon and the first two numerical digits on the display start to flash. 2. Use the “+” and “-” buttons to adjust the hour value. 3. Press the button again so that the other two numerical digits on the DISPLAY begin to flash. 4. Use the “+” and “-” buttons to adjust the minute value. 5. Press the button again to confirm. Note: If none of the buttons are pressed, the settings will be confirmed automatically after 10 seconds have passed. Note: This function does not interrupt cooking and does not affect the oven; it is simply used to activate the buzzer when the set amount of time has elapsed. 1. Press the button several times until the icon and the first two numerical digits on the display start to flash. 2. Use the “+” and “-” buttons to adjust the hour value. 3. Press the button again so that the other two numerical digits on the DISPLAY begin to flash. 4. Use the “+” and “-” buttons to adjust the minute value. 5. Press the button again to confirm. The countdown will then be displayed; at the end of this period of time the buzzer will sound (this may be stopped by pressing any of the buttons, or it will stop of its own accord after one minute). Press button “-” up until 0 • 00. Electronic timer (only for C50EC...) To set the clock Manual Mode To set the timer countdown Programming the duration cooking Programming delayed cooking To cancel a previous setting Cooking End cooking time setting time setting Count down Clock time setting time setting Selector button Note: This may be set while the oven is switched off or while it is switched on. 1. Press the button several times until the icon and the first two numerical digits on the display start to flash. 2. Use the “+” and “-” buttons to adjust the hour value. 3. Press the button again so that the other two numerical digits on the display begin to flash. 4. Use the “+” and “-” buttons to adjust the minute value. 5. Press the button again to confirm. Note: If none of the buttons are pressed, the settings will be confirmed automatically after 10 seconds have passed. The programmer after the Power up and the Clock time setting will be in ‘Manual Mode’ and shall be possible to engage the other programmer functions using the selector. The oven will be driven directly by the user by means of the knobs present on the control panel. Note: This function does not interrupt cooking and does not affect the oven; it is simply used to activate the buzzer when the set amount of time has elapsed. 1. Press the button several times until the icon and the first two numerical digits on the display start to flash. 2. Follow steps 2 to 5 “to set the clock” as detailed above. The countdown will then be displayed; at the end of this period of time the buzzer will sound (this may be stopped by pressing any of the buttons, or it will stop of its own accord after one minute). Note: A cooking mode must be selected before programming can take place. 1. Press the button several times until the icon and the first digit on the display flash. 2. Follow steps 2 to 5 “to set the clock” as detailed above. • For example: it is 9:00 a.m. and a time of 1 hour and 15 minutes is programmed.The programme will stop automatically at 10:15 a.m. Note: A cooking duration must be selected before delayed programming can take place. 1. Follow istruction “programming the duration cooking” as detailed above. 2.Then press the button until the icon and the two digits on the display flash. 3. F...

Descargar ahora

Introduzca dos números de la imagen: