Iniciar sesión:
Votos - 3, Puntuación media: 3 ( )

Manual de usuario Indesit, modelo KD3G2SL/IR

Fabricar: Indesit
Tamaño del archivo: 983.77 kb
Nombre del archivo: KD3G2_KD3G2S_KD3G21_KD3G21S_19504807207.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


This guarantee is only applicable if the appliance has been installed in accordance with the installation instructions detailed in this booklet. To help make best use of your cooking equipment, please read this booklet carefully. The cooker is designed specifically for domestic use and responsibility will not be accepted for use in any other installation. ! When the cooker is first used an odour may be emitted, this will cease after a period of use. When first using the cooker ensure that the room is well ventilated (e.g. open a window or use an extractor fan) and that persons who may be sensitive to the odour avoid any fumes. It is suggested that any pets be removed from the room until the smell has ceased. This odour is due to temporary finish on oven liners and elements and also any moisture absorbed by the insulation. * The guarantee is subject to the provisions that the appliance: a. Has been used solely in accordance with the Users Instruction Book. b. Has been properly connected to a suitable supply voltage as stated on the rating plate attached to this equipment. c. Has not been subjected to misuse or accident or been modified or repaired by any person other than the authorised employee or agent. d. Has been correctly installed. 1. This appliance is intended for nonprofessional use within the home. 2. These instructions are only for those countries whose symbols appear in the booklet and on the serial no. plate of the appliance. 3. This owner’s manual is for a class 1 appliance (insulated) or class 2, subclass 1 appliances (installed between two cabinets. 2 Installation The appliance must$only be installed by a competent person. In the UK, CORGI registered installers undertake to work to safe and satisfactory standards. Before moving your cooker check that it is cool, and switch off at the cooker control unit. Movement of your cooker is most easily achieved by lifting the front as follows: Open the grill door sufficiently to allow a comfortable grip on the underside front edge of the oven roof, avoiding any grill elements. ! Take care in moving the cooker as it is heavy. Take care to ensure that any floor covering is not damaged. (see figure) Splashplate optional, apply to Parts Department (see Back Cover for contact number.) Moving the Cooker The following instructions should be read by a qualified technician to ensure that the appliance is installed, regulated and technically serviced correctly in compliance with current regulations. ! remember to unplug the appliance from the mains before regulating the appliance or carrying out any maintenance work. Positioning ! this unit may be installed and used only in permanently ventilated rooms according to the British Standards Codes Of Practice: B.S. 6172/B.S. 5440, Par. 2 and B.S. 6891 Current Editions. The following requirements must be observed: a. The cooker should not be installed in a bed sitting room with a volume of less than 20m3. If it is installed in a room of volume less than 5m3 an air vent of effective area of 110cm2 is required, if it is installed in a room of volume between 5m3 and 10m3 a supplementary airvent area of 50cm2 is required, if the volume exceeds 11m3 no airvent is required. However, if the room has a door or a window which opens directly to the outside no air vent is required even when the volume is between 5m3 and 11m3. b. During prolonged use of the appliance you may consider it necessary to open a window to the outside to improve ventilation. c. If there are other fuel burning appliances in the same room, B.S.5440 Part 2 Current Edition, should, be consulted to determine the requisite air vent feet in the plinth (900mm - 915mm). Adjust the feet by tilting the cooker from the side. Then install the product into position. ! This appliance must not be fitted on a platform. The cooker is designed to fit between kitchen cabinets spaced 500mm apart. The space either side need only be sufficient to allow withdrawal of the cooker for servicing. It can be used with cabinets one side or both as well as in a corner setting. It can also be used free-standing. Adjacent side walls which project above hob level, must not be nearer to the cooker than 150mm and should be protected by heat resistant material. Any overhanging surface or cooker hood should not be nearer than 650mm. (Fig.A) a. The cooker may be located in a kitchen, a kitonen/ diner or bed sitting room, but not in a bathroom or shower room. b .The hoods must be installed according to the requirements in the hood handbook. c. The wall in contact with the back of the cooker must be of flameproof material. d .The cooker is fitted with a safety chain that must be attached to a hook, secured to the wall behind the appliance. ! some models can have their gas connection inverted. It is important to make sure the safety chain is always situated on the side which corresponds to the hose holder (Fig. B). GB Fig. A Gas connection Fig. B The cooker ...

Otros modelos de este manual:
Placas - KD3G21SL/IR (983.77 kb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría