Votos - 2, Puntuación media: 4 ( )

Fabricar: AEG Tamaño del archivo: 130.35 kb Nombre del archivo: 713601EN.pdf Idioma del manual:

17 Building In ................................................................................................... 17 Building over a cupboard or drawer ...................................................................... 17 Building over a kitchen unit with door ................................................................ 18 Fitting the hob to the worktop ............................................................................... 19 Electrical connections.......................................................................................... 20 Permanent Connection ............................................................................ 21 Wiring diagram .......................................................................................... 21 Fault Finding........................................................................................................... 22 Preliminary Electrical Systems Check.................................................. 22 Ignition System / Gas Ignition .............................................................. 24 Commissioning....................................................................................................... 25 Pressure Testing.......................................................................................... 25 Conversion from Natural Gas to LPG .............................................................. 26 Guide to Use the instructions The following symbols will be found in the text to guide you throughout the Instructions: Safety Instructions Step by step instructions for an+ operation Hints and Tips i This appliance is manufactured according to the following EEC directives: 73/23 EEC - 90/683 EEC - 93/68 EEC 89/ 336 EEC - 90/396 EEC, current edition. Description of the Hob 1 3 3 5 6 7 8 2 4 1. Hob Top 2. Rapid Burner 3. Semi-rapid Burners 4. Auxiliary Burner 5. Control knob for back right burner (semi-rapid) 6. Control knob for back left burner (semi-rapid) 7. Control knob for front left burner (rapid) 8. Control knob for front right burner (auxiliary) INSTALLATION Any gas installation must be carried out by a registered CORGI installer, and in accordance with existing rules and regulations. The relevant instructions are to be found in the second section of this manual. Please, ensure that, once the hob is installed, it is easily accessible for the engineer in the event of a breakdown. WHEN THE HOB IS FIRST INSTALLED Once the hob has been installed, it is important to remove any protective materials, which were put on in the factory. Operation HOB BURNERS To light a burner, turn the relevant control knob anticlockwise to the maximum position, then push it down to ignite the burner. Upon, ignition, adjust the flame as required. If the burner does not ignite, turn the control knob to zero, and try again. When switching on the mains, after installation or a power cut, it is i quite normal for the spark generator to be activated automatically. To ensure maximum ...

Descargar ahora

Introduzca dos números de la imagen: