Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
13) and the cooktop may be used normally. Minute Timer The Minute Timer feature may be useful in the kitchen if a recipe calls for keeping track of time. This feature will keep track of time from 1 to 99 minutes. The Alpha-Numeric display located to the left of the Timer UP/DOWN arrow key pads will begin to count down minutes once set. To Set the Minute Timer: 1. Set the cooktop timer to the desired time by touching the A listed under the word "TIMER". Touching and releasing the A or the V key pads will increase or decrease the Minute Timer setting by 1 minute with each key press (up to 99 minutes). You may also hold the A or V key to slew the time to your designated time. 2. Once the Timer Alpha-Numeric displays the desired amount of time, release the A or V Arrow key pads. The timer will display the time remaining in minutes within the countdown process. During the last 60 seconds, the timer will countdown in seconds. Note: After the timer is set, it is normal for the displayed value to automatically go down by one minute. This is due to the fact that the display only shows the minutes remaining and does not show the countdown process in the bad< ground. For example when setting the timer for 3 minutes, the timer will start counting down at 02 rain 59 seconds, but the timer display will only show D2 minutes, not the remaining seconds. Once the Minute Timer reaches DO a long beep will sound every 5 seconds until A and V key pads are touched at the same time and the timer Alpha-Numeric display will flash ,,nn.indicating that the time uu is up. At any time to cancel the minute To Cancel Minute Timer: timer, pressthe thethe Timer Set/Off pad. Fig. 15 Using the Slider Zone Control The Slider zone control is a new and innovative way to set your cooking zone power. Heat is controlled by just the touch of a finger, resulting in a clean look uncluttered by knobs or dials. These controls are intuitive, precise and very stylish. Three methods of setting these controls are available for a better ease of use. Powering On!OFF the Cooking Zone Once the cooktop is active, touch the Cooking Zone On/OFF pad (Fig. 16) to activate the slider zone control. Fig, 16 Setting the Warm & Hold Feature When the cooking zone is on, press the Warm & Hold pad (Fig. 17) to keep food at serving temperature. l Fig. 17 Cooktop Control Pads Using the Slider Zone Control Method 1 Slide your finger in the slider touch area (Fig. 18). Fig. 18 Method 2 Directly touch any position in the slider touch area (Fig. 19). Fig. 19 / Method 3 Touch < or/and > slew pads for precise power value setting. At startup, pressing < will set the control at Low (Fig. 20) and pressing > will set it at Hi (Fig. 21). Fig. 20 Zone Control Power levels Over 25 power levels are available with the slider controls. Here are the exact positions for those precise settings (Fig. 22). Fig. 22 Setting the Power Boost Feature Your induction cooktop is equipped with a power boost feature on each cooking zone. The pow...
Otros modelos de este manual:Placas - 790.4392* (2.59 mb)
Placas - 790.4392* (2.59 mb)
Placas - 790.4382* (2.59 mb)
Placas - 790.4382* (2.59 mb)