Votos - 2, Puntuación media: 3.5 ( )

Fabricar: Caldera Tamaño del archivo: 394.76 kb Nombre del archivo: Idioma del manual:

Make sure everyone who operates this gas cook top is familiar with the operation and with the following precautions. It is the personal responsibility and obligation of the customer to contract a qualified installer and have the unit connected properly in accordance with local codes or, in the absence of local codes; you will follow for the U.S. the National Fuel Gas Code, ANSI Z223.1 -Latest Edition or for CANADA, CSA-Bl49.1 Natural Gas and Propane Installation Code. The gas cook top must be connected to the proper gas supply and checked for leaks. 3 Operating Instructions Using Gas Safely Gas fuels and their uses can cause minor exposure to benzene, formaldehyde, carbon monoxide and soot, primarily from incomplete combustion. Significant exposure to these substances can cause cancer or reproductive harm. Properly adjusted burners with a blue, rather than yellow, flame will minimize the incomplete combustion. Venting with a hood, or open window will further minimize exposure. The maximum gas supply pressure may not exceed 14-inches W.C.P. (. PSI) Never use a match or other flame to locate a gas leak. Explosion, fire or injury could result. Know where your main gas shut off valve is located. Use proper pan size. Select stable cookware with flat, bottoms. Cookware should be large enough to contain the food and avoid spillovers. This will save cleaning time and avoid accumulations of food debris, which can ignite. Use pans with handles that remain cool and are easy to hold. Always turn the burner controls off before removing cookware. How to Light a Burner Your cook top burners have electric ignition, thus avoiding constantly burning pilot lights. Push the control knob down and turn it counter-clockwise to the first mark to ignite. This is your highest setting. After the burner ignites, you may turn the knob counter-clockwise to adjust the flame setting. To turn the burner off, turn the knob clockwise to the symbol . In case of a power failure, you can light the burners with a match. Hold a lit match to the burner, then push in and turn the control knob 90 degrees counterclockwise. Use extreme caution when lighting burners this way. Burners in use when an electrical power failure occurs will continue to operate normally. 4 • Do not operate the burner for an extended period of time without cookware on the grate. The finish on the grate may chip without cookware to absorb the heat. • Check to be sure that you have turned on the correct burner. Be sure the burners and grates are cool before touching or leaving a potholder, cleaning cloths or other materials on them. • Be sure to turn the control knob off when you finish cooking. How to Select Flame Size • For safe handling of cookware, never let the flames extend up the sides of the cookware. • Watch the flame, not the knob, as you reduce heat. • The flame size should always match the size of your cookware. • Flames larger than the bottom of your cookware are wasted and may cause burns by overheating ...

Descargar ahora

Introduzca dos números de la imagen: