Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
g. , pasta) min 4-6 min Sweet fried bread low 6-10 min Almonds/nuts/ pine nuts* min 3-7 min * In a cold pan. 10 Childproof lock The hob can be protected against being accidentally turned on, to ensure that children do not switch on the hotplates. Activating and deactivating the childproof lock The hob should be turned off. To activate: press the symbol ‚ / $ for approximately 4 seconds. The indicator next to the symbol ‚ / $ lights up for 10 seconds. The hob is locked. To deactivate: press the symbol ‚ / $ for approximately 4 seconds. The lock is now deactivated. Childproof lock With this function, the childproof lock automatically activates when a hob is switched off. Activating and deactivating All of the relevant information on the automatic childproof lock connection can be found in the Basic settings chapter. Powerboost function The Powerboost function can be used to heat large amounts of water more quickly than the power level S. Restrictions when using This function is available on all hotplates, provided that no other hotplate in the same group is operating, (see diagram) . Otherwise, the › and S symbols will flash on the display of the selected hotplate; then the power level S is automatically set. . To activate 1. Select a hotplate. 2. Press the › symbol. The › indicator lights up. The function will have been activated. To deactivate 1. Select the hotplate. 2. Press the › symbol. The › indicator will disappear and the hotplate will return to power level S. The Powerboost function will have been deactivated. Note: In certain circumstances, the Powerboost function may turn off automatically in order to protect the electronic components inside the hob. Time programming function This function may be used in two different ways: ¦ to automatically switch off a hotplate. ¦ as a timer. Turning off a hotplate automatically The zone turns off automatically once the selected time has elapsed. Program the cooking time. The hob must be switched on: 1. Select the desired hotplate and power level. 2. Press the 0 symbol. The x indicator on the hotplate lights up. ‹‹ lights up in the time program function display. 3. Within the next 10 seconds, select the desired cooking time in the programming zone. The possible default setting is, from left to right: 1, 2, 3, etc. , up to 10 minutes. After a few seconds, the cooking time begins to elapse. Note: The same cooking time can be automatically programmed for the all the hotplates. The programmed time passes independently for each of the hotplates. The Basic settings chapter provides information on automatically programming the cooking time. Automatic programming If the previous setting from 1 to 5 is pressed in the programming zone, the cooking time is reduced by one minute. If the previous setting from 6 to 10 is pressed in the programming zone, the cooking time is increased by one minute. Changing or cancelling the time Select the hotplate and then press the 0 symbol. Change the cooking time using the programming zone or set to ‹‹ in order to cancel the time. Automatically switch off a hotplate with the deep- frying function When cooking using the deep-frying function, the programmed cooking time begins to count down once the selected zone reaches the desired temperature. Once the time has elapsed The hotplate switches off. A warning signal sounds. The time program function lights up ‹‹ for 10 seconds in the display. When the 0 symbol is pressed, the indications turn off and the beeping stops. Notes ¦ If cooking times have been programmed for various hotplates, the time programming function always displays the time for the selected hotplate. ¦ Any cooking time can be programmed for up to 99 minutes. The timer The timer can be set for periods of up to 99 minutes. It is independent of the other settings. This function does not automatically switch off a hotplate. Programming 1. Press the 0 symbol several times until the W indicator lights up. ‹‹ lights up in the time program function display. 2. Select the desired time in the programming panel. The timer starts to count down after a few seconds. Changing or cancelling the time Press the 0 symbol several times until the W indicator lights up. Change the time with the programming zone, or set to ‹‹ . Once the time has elapsed A warning signal sounds. In the time program function display ‹‹ is shown, and the W indicator lights up. After 10 seconds the indicators turn off. When the 0 symbol is pressed, the indicators turn off and the beeping stops. Cleaning lock function Cleaning the control panel while the hob is switched on may locked for 35 seconds. The control panel surface can now be change the settings. cleaned without the risk of changing the settings. In order to avoid this, the hob has a cleaning lock function. Note: The lock does not affect the main switch. The hob may Press the ‚ / $ symbol. A signal sounds. The control panel is be turned off when desired. Automatic time limitation If the hotplate remains in ...