Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
0.0 lights up on the hotplate display. 1. Press the O symbol. 2. Within the next 10 seconds, select the Recipes option with the + and - symbols. 3. Move to the next line with the navigation sensor Xand select the required group of dishes with the + and - symbols. 4. Then move to the next line with the navigation sensor Xand select the required dish with the + and - symbols. 5. Activate the function by pressing O. The program is now selected. The temperature symbol remains lit until the frying temperature is reached. A beep will then sound. The temperature symbol will go out and an alert will appear on the display. Add oil to the pan, then add the other ingredients. As usual, turn the food over to avoid burning. Changing the selected program Select the hotplate. Return to the function menu using the O symbol. Then move to the next line with the navigation sensor X and select the required dish with the + and - symbols. Exiting the function early Return to the function menu using the O symbol. Next select the Exit option with the + and - symbols. You can also exit the function by pressing the 0 symbol by pressing the + and - symbols until 0.0 appears on the selected hotplate display. Childproof lock The hob can be protected against being accidentally turned on, to ensure that children do not switch on the hotplates. Turning on and off the childproof lock. The hob should be switched off. To turn on: press and hold the >D symbol for approx. 4 seconds. The D symbol lights up for 4 seconds. The hob is locked. To turn off: press and hold the > D symbol for approx. 4 seconds. The lock is now deactivated. Activating and deactivating the childprooflock With this function, the childproof lock automatically activates when a hob is switched off. Activating and deactivating See the “Basic Settings" section. Powerboost function The Powerboost function can be used to heat large amounts of water more quickly than power level 9. Restrictions when using This function is available on all hotplates, provided that no other hotplate in the same group is switched on, ( see diagram) . Otherwise, Gand 9.0 will flash on the selected hotplate display and the power setting will then be automatically set to 9.0. ) ) . ) . ) . To activate 1. Select the required hotplate using the corresponding symbol ‰ . 2. Press the G symbol. The function has been turned on. To deactivate Select the hotplate by pressing the corresponding symbol ‰ and then press the G symbol. The Powerboost function has been deactivated. Note: In certain circumstances, the Powerboost function may turn off automatically in order to protect the electronic components inside the hob. Time programming function This function may be used in two different ways: ¦ to automatically switch off a hotplate. ¦ as a timer. How to program Enter the time period for the required hotplate. The hotplate turns off automatically once the time has elapsed. The hob must be switched on. 1. Select the required hotplate and power level. 2. Press the 0 symbol twice. The 0.0, min and q indicators light up on the display for the selected hotplate. If you press the ° symbol, instructions on how to select the time will appear on the display. 3. With the next 10 seconds, set the time with the 0 to 9 symbols or with the + and - symbols. Then press the 0 symbol to activate the function. + symbol: 30 minutes - symbol: 10 minutes After a few seconds, the cooking time begins to count down. The cooking time for the selected cooking zone will be shown on the display. Once the time has elapsed The hotplate switches off once this time has elapsed. A beep sounds and 0.0 appears on the hotplate and 00 appears on the time program function display for 10 seconds. When the 0 symbol is pressed, the display turns off and the beep ends. Changing or cancelling the time Select the hotplate and then press the 0 symbol twice. Change the time using the 0 to 9 symbols or with the + and symbols. To cancel the time, programme to zero with the 0 or symbol until 00 appears. Cancelling the time for a hotplate using the frying sensor function When cooking using the frying sensor, the programmed cooking time starts to count down once the cooking zone has reached the required temperature. Notes ¦ Select a hotplate to check the remaining cooking time. ¦ Any cooking time can be programmed for up to 99 minutes. ¦ When the ° symbol is pressed and the time has not been set, an alert will appear on the display. The timer The timer can be set for periods of up to 99 minutes. It is independent of the other settings. This function does not automatically switch off a hotplate. How to program The hob must be switched on. 1. Press the 0 symbol. U, and 00: 00 appear on the time program function display. 2. Set the required time with the 0 to 9 symbols or with the + and - symbols. On the display, the setting will be programmed from right to left. + symbol: 10 minutes - symbol: 5 minutes The cooking time begins to count down after a few se...
Otros modelos de este manual:Placas - PIL875L24E/20 (1.41 mb)