Votos - 0, Puntuación media: 0 ( )

Fabricar: Bosch Tamaño del archivo: 2.77 mb Nombre del archivo: Idioma del manual:

Melted sugar, or foods which contain a lot of sugar which may have spilt, should be cleaned off the hotplate immediately, using the glass scraper. Faults Sometimes certain faults detected can be easily resolved. Before calling the Technical Assistance Service, bear in mind the following advice: Fault Possible cause Solution The general electrical Defective fuse. Check the fuse in the main fuse box and system is malfunctioning. change it if it is damaged. The automatic safety switch or circuit Check the main control panel to see if the breaker has tripped. automatic safety switch or circuit breaker has tripped. The automatic switching on There may be food or cleaning The space between the ignition sparker and function does not work. products stuck between the ignition the burner must be clean. sparkers and the burners. The burners are wet. Dry the burner caps carefully. The burner caps are not correctly Check that the covers are correctly positioned. positioned. The appliance is not earthed, is poorly Contact the installation technician. connected or the earthing is faulty. The burner flame is not The burner components are not Correctly place the parts on the appropriate uniform. correctly positioned. burner. The grooves on the burner are dirty. Clean the grooves on the burner. The gas flow is not normal The gas supply is blocked via Open all gas taps. or there is no gas. intermediary valves. If the gas is supplied from a gas Change the gas cylinder. cylinder, check that this is not empty. Fault Possible cause Solution The kitchen smells of gas. A gas tap has been left on. Turn off the taps. Incorrect coupling of gas cylinder. Check that the coupling is sound. Possible gas leak. Shut off the gas supply, ventilate the premises and immediately notify an authorised installation technician so that they can check and certify the installation. Do not use the appliance until you are sure that there is no gas leak in the installation or appliance itself. The burner immediately switches off after releasing the control knob. The control knob was not held down for long enough. The grooves on the burner are dirty. Once the burner is on, hold the control knob down a few seconds longer. Clean the grooves on the burner. Technical Assistance Service When contacting our Technical Assistance Service, please provide the product number (E-No.) and production number (FD) of the appliance. This information is given on the specifications plate located on the lower section of the hob and on the label in the user manual. Warranty conditions The applicable warranty conditions are those set out by the company's representative office in the country of purchase. Detailed information is available from retail outlets. Proof of purchase must be presented to obtain the benefits of the warranty. We reserve the right to introduce changes. Used appliances and packaging If the )symbol is shown on the specifications plate, bear in mind the following instructions. Environmentally-frien...

Descargar ahora

Introduzca dos números de la imagen: