Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
4 Switching off: Switching on: Front cooking zone Turn control knob 2 to the left or right to the required cooking level (1-9). (Fig. 4) Rear cooking zone Turn control knob 3 to the left to the required cooking level (1-9). (Fig. 4) The power is set continuously variably. Note: the pilot light 1 lights up as soon as a cooking level has been set. A few seconds after switching on, the individual residual heat display (red dot) indicating the chosen cooking zone lights up in the residual heat display panel. 8 Individual residual heat display Switching off: Turn the control knob to the 0 position (Fig. 5). Note: Control knob 3 (with combination function) cannot be switched from the combination position directly to the 0 position. The glass-ceramic cooker additionally features an individual residual heat display. It lights up in the residual heat display panel as a red dot for each cooking zone. When this red dot lights up, the cooking zone concerned cannot be touched, not even after switching off. 0 1 9 3 7 0 1 9 3 7 Fig. 5 Fig. 6 3.2 Operating with the combination function 0 1 9 3 7 0 1 9 3 7 3 Fig. 7 The values in the settings table serve only as a guide because heat levels required will depend on the nature and condition of the food and on the size and fillings of pots and pans used. Switching on the combination function – T urn control knob 3 (rear cooking zone) to the left to the (Combination) position on the left and then to the cooking level you require. Switching off combination: – T urn control knob 3 to the 0 position. The combination and the corresponding cooking area are now off. You must switch on the cooking area again if you wish to continue using it. It is not possible to turn the control knob from the combination position directly to the 0 position. Settings table 0 OFF 1 Keeping warm 2 Melting, soaking 3 Thawing, warming up 4 Cooking, Continued cooking 5 Steaming, stewing 6 Stewing 7 Baking and gentle roasting 8 Roasting 9 Deep frying, bringing to the boil Only switch to the highest cooking level for bringing to the boil and browning. Then always switch back to the lower cooking level. 4. Cleaning and care Please thoroughly clean the appliance before operating it for the first time and after every use. Use a moist cloth and light soapy solution. Wipe dry with a dry, soft cloth. This glass-ceramic cooker does not have any edges that might make cleaning difficult by accumulating dirt. Please pay attention to the fact that the edges of the appliance are sensitive to impact. The cooker's control panel must only be cleaned using a soft, dry cloth and light soapy solution. Do not use any commercially available stainless steel cleaners as these may be aggressive to the printed markings. 5. Maintenance Do not use any abrasive sponges either. Use commercially available window cleaner and apply it to a soft, moist cloth. Please refer to the enclosed brochure for further notes on cleaning. Use a commercially available stainless steel and cooker cleaner for cleaning. Remove baked-in food remainders and coarse dirt with our small scraper (nr.: 087670). Clean the cooking surface regularly with the Gaggenau cooker cleaner (nr.: 098690). Note: to avoid jeopardising the electrical safety of the appliance, it is forbidden to use high-pressure or steam jet cleaning devices. The appliance must be disconnected from the power supply during all repair work. If the appliance does not function correctly, check the fuses first. If the power supply is functioning correctly, but your appliance still does not work, please contact your Gaggenau dealer who will provide you with the address and telephone number of your nearest manufacturer’s authorized service agent or contact Gaggenau USA on (800) 828-9165. Specify the appliance type (see rating plate). Repairs may only be carried out by authorised technicians, in order to guarantee the safety of the appliance. Unauthorised tampering with the appliance will invalidate any warranty claims. Only ever use original spare parts. 6. Assembly instructions 6.1 Important notes on installation Pay attention to the "Important notes" (Chapter 1). The appliance must only be installed by an authorised specialist, paying attention to the relevant regulations of the power supply companies and the regional construction regulations. The installing technician is responsible for perfect functioning of the appliance at its installation location. The operation principle must be explained to the user with reference to the operating instructions. He must draw the user's attention as to how to isolate the appliance from the mains whenever necessary. This cooker corresponds to heat class Y and must be installed in a cabinet as detailed in the sketch (Fig. 8 + 9). When establishing the electrical connections, make sure that connecting leads cannot come into contact with hot parts of the cooking surface. Protection against shock hazards must be ensured after installation! Pay attention to the data on ...