Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
3 seconds. Move function You can use this function to combine the two right hotplates of the same size and select a different heat setting for each hotplate. Preset heat settings: Front hotplate = heat setting S Rear hotplate = heat setting ‚. The heat settings for each hotplate can be changed independently of each other. Notes ¦ Only place the cookware on one of the hotplates. The function will not be activated if there is cookware on both hotplates. ¦ The heat setting lights up less brightly in the display for the hotplate with no cookware; however it is not activated until the cookware is moved onto and detected by this hotplate. ¦ If the function has already been activated and a second piece of cookware is placed on the free hotplate, the display lights up less brightly, as before, but the hotplate is not active. Advice on using cookware To ensure that the cookware is detected and heat is distributed evenly, correctly centre the cookware: Only use one piece of cookware which only covers one hotplate. Moving the cookware from one hotplate to another: Activation Combine the two hotplates which each have different heat settings. 1. Select one of the two hotplates which are included in the move function. 2. Touch the . symbol. The . displays light up. The heat settings appear in the displays for the two hotplates. The function is activated. Notes ¦ The display for the hotplate on which the cookware is placed lights up more brightly. ¦ The ¬ indicator lights up in the display for the hotplate which remains selected. Changing the heat setting Select one of the two hotplates which are included in the move function and change the heat setting in the settings range. Note: If the function is deactivated, the heat settings return to the preset values Deactivation Touch the . symbol. The function is deactivated. Note: When one of the two hotplates is set to ‹, the function is deactivated within approx. 3 seconds. Childproof lock The hob can be protected against being accidentally turned on, to ensure that children do not switch on the hotplates. Activating and deactivating the childproof lock The hob should be turned off. To activate: press the symbol ‚for approximately 4 seconds. The indicator next to the symbol ‚lights up for 10 seconds. The hob is locked. To deactivate: press the symbol ‚for approximately 4 seconds. The lock is now deactivated. Childproof lock With this function, the childproof lock automatically activates when a hob is switched off. Activating and deactivating All of the relevant information on the automatic childproof lock connection can be found in the Basic settings chapter. Powerboost function The Powerboost function can be used to heat large amounts of water more quickly than the power level S. Usage restrictions This function can always be activated for a hotplate, provided the other hotplate in the same group is not in use. (See illustration). Otherwise, › and S flash in the heat setting display; the S heat setting is then set automatically without activating the function. The powerboost function can be activated for Group 2 at any time. .................... ............ Note: In Group 1, the powerboost function can only be activated if the two hotplates are used independently of each other. To activate 1. Select a hotplate. 2. Press the › symbol. The › indicator lights up. The function should be activated. To deactivate 1. Select a hotplate. 2. Press the › symbol. The › indicator will no longer appear and the hotplate will return to the power level S. The function will be deactivated. Note: In certain circumstances, the Powerboost function may turn off automatically in order to protect the electronic components inside the hob. Time programming function This function may be used in two different ways: ¦ to automatically switch off a hotplate. ¦ as a timer. Turning off a hotplate automatically The zone turns off automatically once the selected time has elapsed. Program the cooking time. The hob must be switched on: 1. Select the desired hotplate and power level. 2. Press the 0 symbol. The xindicator on the hotplate lights up. ‹‹ lights up in the time program function display. 3. Within the next 10 seconds, select the desired cooking time in the programming zone. The possible default setting is, from left to right: 1, 2, 3, etc., up to 10 minutes. ........ After a few seconds, the cooking time begins to elapse. Notes ¦ The same cooking time can be set automatically for all hotplates. The set time for each of the hotplates counts down independently. The Basic settings section contains information on automatically programming the cooking time. ¦ If the combi zone or move function is selected when the hotplates are combined, the set time is the same for both hotplates. Automatic programming If the previous setting from 1 to 5 is pressed in the programming zone, the cooking time is reduced by one minute. If the previous setting from 6 to 10 is pressed in the programming zone, the cooking time ...
Otros modelos de este manual:Placas - EH651FS17E/01 (595.74 kb)