Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Note: In certain circumstances, the Powerboost function may turn off automatically in order to protect the electronic components inside the hob. Time programming function This function may be used in two different ways: ¦ to automatically switch off a hotplate. ¦ as a timer. A hotplate should switch off automatically The hotplate switches off automatically after the time that is set has elapsed. Setting the cooking time The hob must be switched on. 1. Select the hotplate and set the heat setting. 2. Touch the 0 symbol. The xindicator for the required hotplate lights up. ‹‹ appears in the timer display. 3. Within the next 10 seconds, set the required cooking time in the control panel. The possible presets from left to right are 1, 2, 3..... up to 10 minutes. ........ After a few seconds, the cooking time begins to elapse. Note: The same cooking time can be automatically programmed for the all the hotplates. The programmed time passes independently for each of the hotplates. The Basic settings chapter provides information on automatically programming the cooking time. Automatic programming If the previous setting from 1 to 5 is pressed in the programming zone, the cooking time is reduced by one minute. If the previous setting from 6 to 10 is pressed in the programming zone, the cooking time is increased by one minute. Changing or cancelling the time Select the hotplate and then press the 0 symbol. Change the cooking time using the programming zone or set to ‹‹ in order to cancel the time. Once the time has elapsed The hotplate switches off. A warning signal sounds. The time program function lights up ‹‹ for 10 seconds in the display. When the 0 symbol is pressed, the indications turn off and the beeping stops. Notes ¦ If cooking times have been programmed for various hotplates, the time programming function always displays the time for the selected hotplate. ¦ Any cooking time can be programmed for up to 99 minutes. The timer The timer can be set for periods of up to 99 minutes. It is independent of the other settings. This function does not automatically switch off a hotplate. Programming 1. Press the 0 symbol several times until the W indicator lights up. ‹‹ lights up in the time program function display. 2. Select the desired time in the programming panel. The timer starts to count down after a few seconds. Changing or cancelling the time Press the 0 symbol several times until the W indicator lights up. Change the time with the programming zone, or set to ‹‹. Once the time has elapsed A warning signal sounds. In the time program function display ‹‹ is shown, and the W indicator lights up. After 10 seconds the indicators turn off. When the 0 symbol is pressed, the indicators turn off and the beeping stops. Automatic time limitation If the hotplate remains in use for a long time and no changes The indicator goes out when any symbol is pressed. The are made in the settings, the automatic time limitation function hotplate can now be reset. is triggered. When the automatic time function is used, it is governed by the The hotplate stops heating. On the hotplate display, ”and ‰ selected power level (from 1 to 10 hours). flash alternately. Cleaning lock function Cleaning the control panel while the hob is on may change the locked for 35 seconds. The surface of the control panel can settings. now be cleaned without risk of changing the settings. In order to avoid this, the hob has a cleaning lock function. Note: The lock does not affect the main switch. The hob mayPress the #symbol. A signal sounds. The control panel is be switched off when desired. Basic settings The device has several basic settings. These settings may be adapted to the user's individual needs. Indicator Function ™‚ Childproof lock ‹ Deactivated.* ‚ Activated. ™. Audible signals ‹ Confirmation and error signals deactivated. ‚ Only confirmation signal deactivated. . All signals activated.* ™† Automatic programming of cooking time ‹ Switched off.* ‚-SS Automatic shut-off time. *Factory settings Indicator Function ™‡ Duration of the time program function warning signal ‚ 10 seconds*. . 30 seconds. „ 1 minute. ™. Power-Management function ‹ = Deactivated.* ‚ = 1,000 W. minimum power. ‚= 1,500 W. . = 2,000 W. etc. S or S. = maximum power of the hob. ™S Hotplate time selection ‹ Unlimited: the last hotplate programmed remains selected.* ‚ Limited: The hotplate will only remain selected for 10 seconds. ™‹ Return to basic settings ‹ Personal settings.* ‚ Return to factory settings. *Factory settings Accessing the basic settings 4. Then select the required setting using the programming panel. The hob should be turned off. 1. Turn on the hob with the main switch. 2. Within the next 10 seconds, press the 0 symbol for 4 seconds. ™‚ is displayed on the left of the screen and ‹ on the right. 3. Press the 0 symbol several times until the indicator for the desired function appears on the left of the screen. 5. Press the 0 symbol again for more than 4 seconds. Th...