|
Resumen del manual
Specification Created 7/08 130456 Dimensions and Installation Information Professional rangetops offer a number of choices in size and rangetop configurations. Product Dimensions and Clearance A 36"- or 42"-wide professional vent hood with a minimum 600 CFM is recommended for installation over this rangetop. * The opening between a 4" high backsplash must be 36" to allow the rangetop to slide back against the wall. WARNING: Installations without a hood require 48" minimum to combustibles above the rangetop. A custom hood installation with exposed horizontal combustible surfaces must have an "auto-on" feature. Refer to hood installation instructions for specific hood clearances. The surface of the entire back wall above the countertop and below the hood must be covered with a non-combustible material such as metal, ceramic tile, brick, marble or other stone. Clearances between rangetop and side wall or combustible material must be at least 12" on each side. Allow 8" free space below the top surface of countertop. Allow additional clearances below the burner box to install the regulator and make house gas supply connections. Use a 90° elbow to route the gas connections and limit interference with drawers or other cabinetry. Controll panel projects forward from standard depth cabinets. Front of deep cabinets can align with control panel beveled edge. ZGU366NPSS (Natural Gas) ZGU366LPSS (Liquid Propane) GE Monogram® 36" Professional Gas Rangetop with 6 Burners ZGU366NPSS (Natural Gas) ZGU366LPSS (Liquid Propane) GE Monogram® 36" Professional Gas Rangetop with 6 Burners Dimensions and Installation Information Backsplash Accessories The rangetop requires a 12" minimum clearance to a vertical combustible surface at the rear. A backsplash is required for installations with less than 12" clearance. The following backsplash accessories are available, or a custom, non-combustible backsplash can be used. ZX12B36PSS, 12" backsplash ZXADJB36PSS, 30"-36" adjustable-height backsplash with warming shelf Backsplash with Warming Shelf All Monogram® Professional Hoods feature infrared warming lights. The 30"-36" adjustable backsplash with warming shelf is a perfect complement when installed with the tapered or straight-sided hoods. • Restaurant-Style Professional Hoods are shipped with a 22" stainless steel backsplash and warming shelf. Side View with a Backsplash For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. Advance Planning for 36" Professional Rangetops Professional rangetops offer a number of choices in size and rangetop configurations. • All Professional rangetops are factory set for natural or liquid propane gas. The correct model should be ordered for the installation situation. Note: Conversion kits are included with the rangetop if the wrong gas type was ordered. High Altitude kit, WB28K10553, is also available. The kits must be installed by a qualified ser...
Otros modelos de este manual:Placas - GE Monogram ZGU366LPSS (373.14 kb)