Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
• Never point the WebCam lens at the sun. Copyright Copyright© 2003 by Philips Consumer Electronics B.V. All rights reser ved. No par t of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without prior written permission from Philips. Brands and product names are trademarks or registered trademarks of their respective companies. EN Installation Installing the WebCam software The software supplied only works on PCs with the operating systems Microsoft® Windows®, XP and Vista. Notes! – Unplug all your USB devices (except USB keyboard and USB mouse) before you start. – Do not plug in your WebCam yet. Run the Installation CD-ROM first. – Have your Windows® CD-ROM at hand. 1 Place the installation CD-ROM in your PC’s / laptop’s CD-ROM / DVD drive. > After a couple of seconds the ‘Language selection’ screen appears. Note! If the ‘Language selection’ screen does not appear automatically, open the Microsoft® Windows® Explorer and double click on the 'Set-up.exe' icon in the CD-ROM director y. 2 Select your language. > Installation continues automatically. > The ‘Welcome’ screen appears. 3 Click ‘Next’ to continue. > The ‘Manual’ screen appears. 4 Select the first option if you wish to read the user manual before continuing installation.You can print out the manual so you will have it at hand during the rest of the installation process. After you read or printed the user manual, continue installation by selecting the second option. Installation EN Or: Select the second option if you wish to continue installation. Click ‘Next’ to continue. > The ‘Installation’ screen appears. The items that can be installed are shown on the left side of the screen. An explanation of each item is given on the right side. All items are already selected for installation. 5 Click the 'Next' button if you wish to install all items. Or: If there are certain items you do not wish to install, check the boxes before these items. Select at least ‘SPC520NC WebCam Driver’ and ‘Philips VLounge’ for SPC520NC WebCam as well as for SPC525NC WebCam (software is the same for both WebCams). Click the 'Next' button. > The following software license agreement appears. 6 Click on 'Yes' to continue the installation. > The following screen appears when the installation was successful. 7 Select the user manual. Or: Click 'Next' to continue. > The ’Reboot’ screen appears. 8 Select ‘Yes’ to restart your PC / laptop. > V(ideo)-Lounge desktop shortcut ‘ ’ will be installed after installation. > Via VLounge you have access to all camera-related software. See ‘Operating the WebCam’. 9 You can now connect your WebCam. Connecting the WebCam to your PC / laptop 1 Be sure to run the installation CD first, before connecting the WebCam to the PC / laptop. 2 Turn on the PC / laptop. 3 Connect the USB connector of the USB cable to the USB port of the PC / laptop. > The WebCam will now derive its power from the PC / laptop. 4 Aim the webcam as required. 5 Push the USB cable into the cable management slot. 6 Use the clamp and the two rubber rims to attach the WebCam to your PC monitor or laptop screen. 7 Connect the headset audio cable (SPC525NC only) to the sound card of your PC / laptop. • Connect the black headphone plug (n) to the headphone socket of the PC sound card. • Connect the grey microphone plug (!) to the microphone or green socket of the sound card. EN Installation 10 AUDIO OUT AUDIO IN AUDIO OUT AUDIO IN 3 3 6 6 7 7 5 5 WebCam settings EN The Philips SPC520NC/SPC525NC video proper ties can be changed: -from within an application; -by clicking the VProper ty icon ‘ ’ in the Windows taskbar, bottom right of your screen; -by selecting ‘PC Camera Settings’ under ‘Preferences’ in the VLounge selection screen; - by clicking the ‘ ’ icon in the VLounge selection screen. General settings 1 2 1 Flickerless image The Flickerless image option should only be used under flickering light conditions (e.g. fluorescent or neon lamps) to prevent flickering or strangely colored video images. If this option is used under normal lighting conditions the video image may be overexposed. 2 Region If you are using the Philips SPC520NC/SPC525NC in Europe, select '50 Hz' and if you are using the Philips SPC520NC/SPC525NC in Nor th America, select '60 Hz'. For Asia this setting is dependent on the local mains output. E.g. for China, select ‘50 Hz’ and for Taiwan, select ‘60 Hz’. For Japan the setting is region dependent. Please check your local mains output to find the correct ‘Region’ setting. EN WebCam settings Video settings 3 4 5 6 7 8 9 0 ! @ # $ % ^ 3 Full automatic control: on/off This full automatic control mode provides a ver y easy way to get the best out of your Philips SPC520NC/SPC525NC WebCam. Or you can choose to have maximum manual control over the WebCam settings by switching ...
Otros modelos de este manual:Webcams - SPC525NC/00 (3.16 mb)
Webcams - SPC520NC/00 (3.16 mb)