All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0907R) © 2009 Cisco Systems, Inc. All rights reserved. OL-20138-02 Contents Chapter 1: Introduction 1 Minimum Requirements 2 Camera Lens Specifications 3 Chapter 2: Planning Your Wireless Network 5 Wireless Network Layout 5 Additional Security Tips 6 Security Threats Facing Wireless Netw

Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth. If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water to which a small amount of neutral detergent has been added, and then wipe it evenly with a dry cloth of the same type until the surface is dry. Cleaning the Camera Lens A _ Caution Do not touch the camera after installation is completed. If you need to clean the camera lens, use a dry microfi

STEP 3 Set up and focus your camera before placing it in the enclosure. When it is in the enclosure, you can’t make any more adjustments. Refer to the PVC2300 and WVC2300 Administration Guide for setup instructions. NOTE The Cisco WVC2300 camera must be wired to be used in the enclosure. Wireless mode is not supported. Camera Accessories Installation and Administration Guide Accessory Installation Processes Installing the PVC2300/WVC2300 Cameras in a VC 020 Enclosure Preparing the Enclosure STEP